XpressRICH-AXI™ is a configurable and scalable PCIe controller Soft IP designed for ASIC and FPGA implementation. The XpressRICH-AXI Controller IP for PCIe 5.0 is compliant with the PCI Express 5.0, 4.0, and 3.1/3.0 specifications, as well as with the PHY Interface for PCI Express (PIPE) specification and the AMBA® AXI™ Protocol Specification. The IP can be configured to support endpoint, root port, and dual-mode topologies, allowing for a variety of use models, and exposes a configurable, flexible AMBA AXI interconnect interface to the user. The provided Graphical User Interface (GUI) Wizard allows designers to tailor the IP to their exact requirements, by enabling, disabling, and adjusting a vast array of parameters, including number, type, and width of AXI interfaces, PIPE interface width, low power support, SR-IOV, ECC, AER, etc. for optimal throughput, latency, size and power. Users may optionally enable the built-in legacy DMA engine, or connect a DMA engine externally such as PLDA's vDMA-AXI DMA, depending on the application requirements. PLDA is working hand in hand with multiple PHY IP vendors and Verification IP vendors to offer a range of integrated solutions for PCIe 5.0 at 32GT/s. PLDA XpressRICH-AXI Controller IP for PCIe 5.0 is the #1 choice for ASIC, SoC and FPGA designers looking for an enterprise-class PCIe interface solution with a high-performance, reliable, and scalable AMBA 3 AXI/AMBA 4 AXI interconnect.