English
You are here:
PHY IP for PCIe 5.0 on TSMC N6
The multi-channel DesignWare® PHY IP for PCI Express® (PCIe®) 5.0 includes Synopsys’ high-speed, high-performance transceiver to meet today’s demands for higher bandwidth. The PHY meets the needs of today’s high-speed chipto-chip, board-to-board, and backplane interfaces while being extremely low in power and area.
Using leading-edge design, analysis, simulation, and measurement techniques, Synopsys delivers exceptional signal integrity and jitter performance that exceeds the PCI Express standard’s electrical specifications. The high-margin, robust PHY architecture tolerates process, voltage and temperature (PVT) manufacturing variations and is implemented with standard CMOS digital process technologies.
The multi-tap transmitter and receiver equalizers, along with the advanced built-in diagnostics and ATE test vectors, enable customers to control, monitor and test for signal integrity without the need for expensive test equipment. This provides on-chip visibility into actual link and channel performance to quickly improve signal integrity, reducing both product development cycles and the need for costly field support.
Using leading-edge design, analysis, simulation, and measurement techniques, Synopsys delivers exceptional signal integrity and jitter performance that exceeds the PCI Express standard’s electrical specifications. The high-margin, robust PHY architecture tolerates process, voltage and temperature (PVT) manufacturing variations and is implemented with standard CMOS digital process technologies.
The multi-tap transmitter and receiver equalizers, along with the advanced built-in diagnostics and ATE test vectors, enable customers to control, monitor and test for signal integrity without the need for expensive test equipment. This provides on-chip visibility into actual link and channel performance to quickly improve signal integrity, reducing both product development cycles and the need for costly field support.
View PHY IP for PCIe 5.0 on TSMC N6 full description to...
- see the entire PHY IP for PCIe 5.0 on TSMC N6 datasheet
- get in contact with PHY IP for PCIe 5.0 on TSMC N6 Supplier
Video Demo of the PHY IP for PCIe 5.0 on TSMC N6
This video features Synopsys’ DesignWare PHY IP for PCI Express 5.0 meeting the Rev. 1.0 specification’s channel performance and jitter tolerance. The IP operates at 32GT/s data rate and exceeds the required 36 dB channel loss to enable high-throughput over the toughest, long-reach channels. Accelerate your move to PCI Express 5.0 with Synopsys’ DesignWare IP.
PCI Express PHY IP
- PHY/PCS Logical Sub-Block IP Core for PCIe supporting PCIe 5.0, 4.0, 3.1 PHY/PMA and compliant to the PIPE 5.2 and 4.4.1 Specifications
- PCIe 2.1 Controller with the PHY Interface for PCI Express (PIPE) specification and native user interface support
- PCIe 3.0, 2.1, 1.1 Controller with the PHY Interface for PCI Express (PIPE) specification and native user interface support
- PCIe 5.0 PHY in TSMC (16nm)
- PCIe 2.1 Controller supporting Root Port, Endpoint, Dual-mode Configurations, with Built-in DMA and Configurable AMBA AXI Interconnect
- PCIe4 Ethernet SERDES PHY - TSMC N5