English
You are here:
Power Management Unit (2.3 - 3.0V output voltage, load current 150mA)
130iHP_PMU_02 is designed to form stabilized voltage with overcurrent indication (bit OVC). The block has configurable output voltage (2.3 / 2.4 / 2.5 / 2.6 / 2.7 / 2.8 / 2.9 / 3.0 V) with parameters specified for 150 mA output current.
Status of bit OVC = "1", when load current value exceeds 225 mA.
Status of bit OVC = "1", when load current value exceeds 225 mA.
Features
- iHP SiGe BiCMOS 0.13 um
- Output voltage: 2.3 ... 3.0 V
- Overcurrent indication
- Output current 150 mA
- Low quiescent consumption
- Small area 0.122 mm2
Deliverables
- Schematic or NetList
- Abstract view (.lef and .lib files)
- Layout (optional)
- Verilog behavior model
- Extracted view (optional)
- GDSII
- DRC, LVS, antenna report
- Test bench with saved configurations (optional)
- Documentation
Applications
- Battery powered devices
- Core voltage
- Supply voltage sensitive circuits
- Power solutions
- Clocking systems
View Power Management Unit (2.3 - 3.0V output voltage, load current 150mA) full description to...
- see the entire Power Management Unit (2.3 - 3.0V output voltage, load current 150mA) datasheet
- get in contact with Power Management Unit (2.3 - 3.0V output voltage, load current 150mA) Supplier
PMU IP
- Buck DC-DC Converter for Integrated PMU (Silicon-proven 40 nm, 140 mA, optimized clocking to eliminate spurious emissions for low system noise)
- General Purpose PMU - Thermal shutdown and overvoltage protected SilTerra 0.18 μm
- Voltage Reference for Integrated PMU (Silicon-proven 40 nm, low-power for IoT with quiescent current of <0.9 μA)
- Bandgap Reference for Integrated PMU (Silicon-proven 40 nm, high-accuracy of < ±1%)
- Advanced Power Controller w/ POR & BOR for PMU DC-DC and LDO ( Vin = 2.3-3.6V ) - TSMC 65nm
- Advanced Power Controller w/ POR & BOR for PMU DC-DC and LDO ( Vin = 2.3-5.5V ) - TSMC 65nm