English
You are here:
Programmable LDO voltage regulator (output voltage 1.6 to 2.2 V)
The regulator stabilizes the external voltage (supply voltage) and forms an output level of the specified value. Adjustment is carried out by positive feedback through the operational amplifier. Feedback allows for voltage drop on the wire by which stabilized voltage is supplied to the cell.
The block is fabricated on iHP SiGe BiCMOS 0.25 um (SGB25V) technology.
The block is fabricated on iHP SiGe BiCMOS 0.25 um (SGB25V) technology.
Features
- iHP SiGe BiCMOS 0.25 um
- Output voltage 1.6…2.2 V
- High precision stabilization voltage
- Several operating modes
- Low current consumption
- Small area
- Low output level vs. supply voltage in a wide range
- Supported foundries: TSMC, UMC, Global Foundries, SMIC, iHP, AMS, Vanguard, SilTerra
Deliverables
- Schematic or NetList
- Abstract model (.lef and .lib files)
- Layout view (optional)
- Behavioral model (Verilog)
- Extracted view (optional)
- GDSII
- DRC, LVS, antenna report
- Test bench with saved configurations (optional)
- Documentation
Applications
- Portable electronic devices
- System-on-chip for different purposes
- Measurement and calibration systems
- Navigation systems
- Communication systems
View Programmable LDO voltage regulator (output voltage 1.6 to 2.2 V) full description to...
- see the entire Programmable LDO voltage regulator (output voltage 1.6 to 2.2 V) datasheet
- get in contact with Programmable LDO voltage regulator (output voltage 1.6 to 2.2 V) Supplier
voltage regulator
- 100 dB Dynamic Range, 16-24-bit six channel audio ADC, with embedded Voice Activity Detector and low-noise voltage regulator
- 100 dB Dynamic Range, 24-bit stereo CODEC with six-channel ADC, digital PWM DAC and a low-noise embedded voltage regulator
- Linear Voltage Regulator - High Input Voltage (30V), Output Load up to 5mA XFAB 0.35 μm
- Capless LDO voltage regulator (130 nm, 20 mA, excellent load transient)
- 30 mA linear voltage regulator
- LDO voltage regulator