English
You are here:
Triple Video DAC 10-Bits, 240Mhz
This IP is composed of a triple channel 10-bits 240 MS/s DAC, designed for industry standard 0.18um 1P6M CMOS technology supplied at 3.3V.
Each independent DAC uses a segmented current steering architecture, combined with improved twodimensional centroid switching scheme, to achieve simultaneously high update rates, at least 10-bit of intrinsic static accuracy, and a very good dynamic
characteristics.
The differential output supports single-ended applications and is designed to be loaded by double 75Ω line termination, (37.5Ω).
An external resistor, 1k8Ω typical is used to set the full scale current of the DAC.
Each independent DAC uses a segmented current steering architecture, combined with improved twodimensional centroid switching scheme, to achieve simultaneously high update rates, at least 10-bit of intrinsic static accuracy, and a very good dynamic
characteristics.
The differential output supports single-ended applications and is designed to be loaded by double 75Ω line termination, (37.5Ω).
An external resistor, 1k8Ω typical is used to set the full scale current of the DAC.
View Triple Video DAC 10-Bits, 240Mhz full description to...
- see the entire Triple Video DAC 10-Bits, 240Mhz datasheet
- get in contact with Triple Video DAC 10-Bits, 240Mhz Supplier
DAC IP
- 120 dB SNR, 24-bit stereo audio DAC with cap-less headphone driver, low power mode and ultra low latency capability for headset applications
- 802.11 b/g/n Transceiver w/ ADC & DAC
- 12-Bit 1.43GS/s Current Steering DAC
- 105 dB of SNR, 24-bit stereo PDM to PWM transmodulator DAC
- Audio codec with capacitor-less 106 dB dynamic range ADC and 120 dB SNR DAC with very low latency filters and ultra low power mode
- 12-Bit 1 MS/s DAC with voltage output