English
You are here:
UDP/IP Hardware Protocol Stack - 100G
The Digital Blocks DB-UDP-IP-100GbE-AMBA is a UDP/IP Hardware Stack / UDP Off-load Engine (UOE) with low latency, high-performance targeting 100 GbE network links. The DB-UDP-IP is a Verilog SoC IP Core targeting Intel/Altera and Xilinx FPGAs and ASIC/ASSP devices.
Features
- 100 GbE network links
- Low latency, high-performance wire-line performance
- Internet Protocol (IP) Packet Processor:
- IP & ICMP (Internet Control Message Protocol) Protocol
- Host IP address filter, IP header checksum check & generator, user-selectable Maximum Transmission Unit (MTU), Unicast & Multicast Packet support
- Compliance with IETF IPv4/IPv6 RFCs
- User Datagram Protocol (UDP) Packet Processor:
- Support for up to 256 UDP Ports
- UDP header checksum check & generator
- Compliance with IETF UDP RFCs
- Address Resolution Protocol (ARP) Packet Processor (client/server) with 4-16 entry ARP cache
- VLAN Support, DHCP, IGMP, Jumb Frames
- Interface to Intel/Altera (Avalon-ST) & Xilinx & Synopsys 100G MAC
- High Speed Data Interface to user Host Application:
- 256-bit / 512-bit AXI4-Stream
- Host set-up & control via Control & Status Registers and Interrupt Controller
- 32-bit AXI4-Lite or APB or AHB
- Pipeline, High Clock Rate, Low Latency architecture & design
- Fully-synchronous, synthesizable RTL Verilog SoC IP core
Deliverables
- Verilog RTL Source or technology-specific netlist.
- Comprehensive testbench suite with expected results.
- Synthesis scripts.
- Installation & Implementation Guide.
- Technical Reference Manual.
View UDP/IP Hardware Protocol Stack - 100G full description to...
- see the entire UDP/IP Hardware Protocol Stack - 100G datasheet
- get in contact with UDP/IP Hardware Protocol Stack - 100G Supplier