English
You are here:
USB 2.0 PHY Device/Host/OTG/Hub TSMC 28HPC/HPC+/HPM
The INNOSILICON USB 2.0 OTG PHY is fully compliant with UTMI+ level 3 Rev 1.0 specification. Offering excellent performance combined with a die size up to 30% less than the competition, this PHY is the perfect companion for your design. The impressively small die size offers all functionality needed for a complete USB solution. HS, FS and LS support with OTG along with all required I/O's, primary and secondary ESD, self-calibrated DP/DM termination and an integrated PLL. The low latency of this design supports Hub mode with a 40 bit time round trip delay.
If your solution requires more than one USB port, a further size efficiency can be had by choosing a multiport solution. The INNOSILICON USB 2.0 PHY is available is 1, 2, 3 and 4-port configurations.
To support production test with high coverage, this PHY includes BIST, loop back, and boundary scan functionality.
If your solution requires more than one USB port, a further size efficiency can be had by choosing a multiport solution. The INNOSILICON USB 2.0 PHY is available is 1, 2, 3 and 4-port configurations.
To support production test with high coverage, this PHY includes BIST, loop back, and boundary scan functionality.
View USB 2.0 PHY Device/Host/OTG/Hub TSMC 28HPC/HPC+/HPM full description to...
- see the entire USB 2.0 PHY Device/Host/OTG/Hub TSMC 28HPC/HPC+/HPM datasheet
- get in contact with USB 2.0 PHY Device/Host/OTG/Hub TSMC 28HPC/HPC+/HPM Supplier