Video In to AXI4-Stream
Xilinx Video in to AXI4-Stream IP core enables video designers to quickly and easily connect external video signals to video processing blocks that use AXI4-Stream.
The Video In to AXI-4 Stream LogiCORE™ IP core converts common parallel video signals (such as from a DVI PHY) to an AXI4-Stream interface. The input video signals must have data, clock, DE, sync signals (Vsync and Hsync) and/or blanking signals (Vblank and Hblank). The AXI4-Stream interface signals are compliant to the AXI4-Stream Video Protocol as defined in the AXI Reference Guide (UG761), and as is implemented on most Xilinx Video IP cores. This enables video designers to quickly and easily connect an external video source to subsequent processing blocks that use a video protocol on the AXI4-Stream interface (such as Xilinx Video IP). This core works in conjunction with the Xilinx Video Timing Controller (VTC) core to detect characteristics of the incoming video format that can be read by a system processor and used to configure subsequent processing blocks. Source code is provided with the core to allow customers to adapt the core to work with unique video signals that may not already be included in the core.
View Video In to AXI4-Stream full description to...
- see the entire Video In to AXI4-Stream datasheet
- get in contact with Video In to AXI4-Stream Supplier
Interface and Interconnect IP
- Standard Compliant AMBA AXI SoC Interconnect, Soft IP
- Standard Compliant AMBA AHB SoC Interconnect, Soft IP
- AXI- Interconnect : Advanced Extensible Interface Bus IP
- Serial Peripheral Interconnect Master & Slave Interface Controller
- Physical Layer Interface Core
- PCIe 2.1 Controller supporting Root Port, Endpoint, Dual-mode Configurations, with Built-in DMA and Configurable AMBA AXI Interconnect