Design & Reuse
arrow A/D Converter (ADC) (514)
arrow Amplifier (102)
arrow Analog Comparator (20)
arrow Analog Filter (27)
arrow Analog Front Ends (38)
arrow Analog Multiplexer (3)
arrow Analog Subsystems (3)
arrow Clock Synthesizer (77)
arrow Coder/Decoder (CODEC) (106)
arrow D/A Converter (DAC) (213)
arrow DC-DC Converter (62)
arrow DLL (743)
arrow Graphics & Video Modules (5)
arrow Oscillator (328)
arrow Oversampling Modulator (8)
arrow PLL (1708)
arrow Power Management (850)
arrow RF Modules (82)
arrow Sensor (82)
arrow Switched Cap Filter (1)
arrow Temperature Sensor (135)
arrow Other (498)
102 IP
1
100.0
Fractal-D Amplifier
SiliconIntervention applies an architectural approach to solving the real-world problem of maximizing efficiency in Class-D drivers over a wide range ...
2
3.0
Low-Offset Programmable Gain Amplifier on UMC55nm
This present IP is applied to amplify the input signal with the programmable gain in Standalone/PGA mode or to work as a buffer in Follower mode, whic...
3
3.0
Power Amplifier 0.7-1 GHz
The IC1A comprises a low-band Doherty PA with Preamplifier, an input bypass switch , a power detector, a DPD coupling path, a temperature sensor all c...
4
2.0
7 to 20 MHz Intermediate frequency amplifier
The device is a dual Intermediate-frequency amplifier (IFA) which consists of 4-stage amplifier with tunable gain, an input linear buffer for analog o...
5
2.0
Intermediate frequency amplifier with wide gain range
Intermediate-frequency amplifier consists of 3-stages amplifier with tunable gain, AGC system, linear output buffer for differential analog output, an...
6
2.0
Low-Noise Amplifier 10-15GHz
Low-Noise Amplifier 10-15GHz...
7
2.0
Low-Noise Amplifier 26-30GHz
The WEA2630L45G is an integrated low-noise amplifier designed for Microwave Backhaul,5G Communications and mm-Wave Wireless Phase Arrays receiver appl...
8
2.0
Low-Noise Amplifier 76-81 GHz
The WEA7681L22G is an integrated low-noise amplifier with Gain Control block designed for Automotive Radar and mm-Wave Wireless Phase Arrays receiver ...
9
2.0
Power Amplifier 130-170GHz
The WEA130170P55S consists of four cascaded differential amplifying stages. The first three stages are cascode stages,while the final one is a common ...
10
2.0
Power Amplifier 26-30GHz
The WEA2630P45G is an integrated power amplifier designed for Microwave Backhaul,5G Communications and mm-Wave Wireless Phase Arrays receiver applicat...
11
2.0
Power Amplifier 76-81GHz
The WEA7681P22G is an integrated power amplifier designed for Microwave Backhaul,5G Communications and mm-Wave Wireless Phase Arrays receiver applicat...
12
1.0
3 -4.5 GHz Power Amplifier
...
13
1.0
5 GHz Low Noise Amplifier
...
14
1.0
3 to 10GHz Low Noise Amplifier for UWB Application
...
15
1.0
2 TO 6 GHz Driver Amplifier
...
16
1.0
2 to 6 GHz Low Noise Amplifier
Broadband Amplifier High Performance Low Current, Low Cost High Gain...
17
1.0
0 to 62 dB intermediate frequency amplifier
The device is a dual Intermediate-frequency amplifier (IFA) which consists of 4-stage amplifier with tunable gain, an input linear buffer for analog o...
18
1.0
7-20 GHz Driver Amplifier
...
19
1.0
2-8GHz Driver Amplifier
...
20
1.0
0.035... 100 MHz intermediate-frequency amplifier
IFA consists of 6-stage amplifier with tunable gain, AGC system, linear output buffer for differential analog output. Gain is sequentially reduced fr...
21
1.0
5.0V Programmable Gain Amplifier
The L7SPGA4B10G IP is programmable gain amplifier (PGA), which consists of single ended amplifier, input and output switches, 14-selectable gain paths...
22
1.0
0.1 to 150 MHz LNA with 5 dB NF and 57 dB gain
065TSMC_LNA_09 is used to amplify signal from the radio receiver input in band up to 150MHz. LNA has a low noise figure, high linearity and wide gain ...
23
1.0
0.4-4GHz Wideband Low Noise Amplifier
...
24
1.0
2.4GHz-2.5GHz, 25dBm Power Amplifier
...
25
1.0
1.5GHz-1.7GHz Low Noise Amplifier
RJL02 is a narrow band low noise amplifier. This LNA is designed on 0.18 SiGe BiCMOS process. This device is design for GPS system application....
26
1.0
1.7 to 2.5 GHz PCS/WCDMA band Low Noise Amplifier
...
27
1.0
1.7-2.5GHz Low Noise Amplifier with High OIP3
...
28
1.0
0.7-3 GHz Low noise amplifier
The RGLNA01 is 0.7 to 3.0 GHz high efficiency GaAs Enhancement mode pHEMT Low Noise Amplifier IP Block .The device is designed for use in the IEEE 802...
29
1.0
1.7GHz-2.7GHz Two Stage Low Noise Amplifier
A high efficiency CMOS 2 stage Low Noise Amplifier designed on 0.18µm SiGe BiCMOS process. The device is designed for use in the 802.11b/g and WLAN MI...
30
1.0
0.80-0.96 GHz 2Watts, 900MHz band Power Amplifier
...
31
1.0
4.9 to 5.9GHz Power Amplifier
...
32
1.0
10-20GHz Differential Amplifier
The GRDA1 is 10 GHz to 20 GHz differential amplifier designed on 2 um InGaP HBT process. The gain of GRDA1 is 5 dB typically with flatness of ±3dB ove...
33
1.0
900MHz, 2140MHz & 2700 MHz, 1 watt wide band Power Amplifier
...
34
1.0
900MHz, 2140MHz & 2700 MHz, 2 watt wide band Power Amplifier
The RPW12A is 2 watt high linearity single-stage wide band Power Amplifier for the frequency range of 900MHz, 2140MHz & 2700 MHz implemented on InGaP ...
35
1.0
915MHz - 930MHz RPA12C Single stage low power low current PA
...
36
1.0
65 to 3000 MHz low noise amplifier
065TSMC_LNA_10 is a low noise amplifier (LNA) with an operating frequency range from 65 to 3000MHz. The block is used to amplify weak signal at receiv...
37
1.0
1550 to 1610 MHz low-noise amplifier
180TSMC_LNA_08 a low noise amplifier (LNA) is usually used as the first stage of receivers and is characterized by low noise figure and high linearity...
38
1.0
Rail-To-Rail Operational Amplifier - GlobalFoundries 40nm
Rail-To-Rail Operational Amplifier - GlobalFoundries 40nm...
39
1.0
Rail-To-Rail Operational Amplifier - XFAB 180nm
Rail-To-Rail Operational Amplifier - XFAB 180nm...
40
1.0
Feedback Error amplifier - TSMC 180nm
Feedback Error amplifier - TSMC 180nm...
41
1.0
2GHz-6GHz High Efficiency Broadband Low Noise Amplifier
The RS03 is 2 to 6 GHz; high efficiency Broadband Single Stage Low noise amplifier, designed on 0.35-ìm SiGe BiCMOS technology. The device is designed...
42
1.0
2GHz-6GHz Low noise amplifier
...
43
1.0
Differential difference amplifier, 10MHz - IHP 250nm SiGe
Differential difference amplifier, 10MHz - IHP 250nm SiGe...
44
1.0
SiGe BiCMOS WCDMA Power Amplifier
The RJP01 is 1.920 to 1.980 GHz high efficiency WCDMA Power Amplifier. The Amplifier is designed using 0.18 um SiGe BiCMOS technology. Power amplifier...
45
1.0
SiGe BiCMOS WLAN Power Amplifier
The RJP05 is 2.4 GHz to 2.5 GHz; high efficiency Power stage for WLAN Power Amplifier. The Amplifier is designed using 0.18um SiGe BiCMOS process for ...
46
1.0
Single stage low noise amplifier from 2-6 GHz with flat gain, low Noise Figure, high isolation, stability.
RFLN04C is a single stage low noise amplifier with flat gain, low Noise Figure, high isolation, stability. The LNA is designed to operate from 2-6 GHz...
47
1.0
InGaP HBT low power buffer amplifier
The GEDA02 is 20 GHz to 40 GHz low power buffer amplifier. The amplifier is designed using 2 ìm InGaP HBT process for high frequency applications. ...
48
1.0
Low noise amplifier for 28-40 Ghz frequencies for 5G, satcom and other applications
RFLN05C is a four stage low noise amplifier. It provide high gain over wide bandwidth,low Noise Figure, high isolation, stability. The LNA is designed...
49
1.0
Low noise amplifier for GNSS - GlobalFoundries 130nm RFSOI
Low noise amplifier for GNSS - GlobalFoundries 130nm RFSOI...
50
1.0
Low noise amplifier with lange couplers for 20-40 GHz frequencies for 5G , satcom and other applications
RFLN03C is a three stage low noise amplifier with Lange Coupler at input & output side for perfect input and output matching to 50 ohms. It provides h...