Design & Reuse
arrow A/D Converter (ADC) (513)
arrow Amplifier (101)
arrow Analog Comparator (19)
arrow Analog Filter (27)
arrow Analog Front Ends (38)
arrow Analog Multiplexer (3)
arrow Analog Subsystems (3)
arrow Clock Synthesizer (77)
arrow Coder/Decoder (CODEC) (106)
arrow D/A Converter (DAC) (213)
arrow DC-DC Converter (62)
arrow DLL (745)
arrow Graphics & Video Modules (15)
arrow Oscillator (322)
arrow Oversampling Modulator (8)
arrow PLL (1704)
arrow Power Management (838)
arrow RF Modules (84)
arrow Sensor (82)
arrow Switched Cap Filter (1)
arrow Temperature Sensor (133)
arrow Other (500)
500 IP
151
1.0
Divide-By-Two, up to 12GHz, Programmable Direct / Div-By-2 Modes, up to 12GHz - GlobalFoundries 40nm
Divide-By-Two, up to 12GHz, Programmable Direct / Div-By-2 Modes, up to 12GHz - GlobalFoundries 40nm...
152
1.0
GLOBALFOUNDRIES 0.11um 1.2V POR
Present Power on Reset generates system reset signals (RESET and RESETN) when 1.2V power (POR_VDD) rises to a specific level, i.e., Vtr....
153
1.0
GLOBALFOUNDRIES 0.11um 3.3v-1.2v Power Regulator
Targeted in GLOBALFOUNDRIES 0.11μm 3.3v Logic process, current design of Power Regulator is to provide 1.2v power supply which is regulated from the s...
154
1.0
GLOBALFOUNDRIES 0.13um 3.3v-1.2v Power Regulator
Targeted in GLOBALFOUNDRIES 0.13um 3.3v Logic process, current design of Power Regulator is to provide 1.2v power supply which is regulated from the s...
155
1.0
GLOBALFOUNDRIES 40nm LP 2.5V/1.1V Power on Reset
The present Power-On-Reset circuit generates system reset pulses (RST) when both the 2.5V and 1.1V power suppliers are turned on. Output signal RST11 ...
156
1.0
SLVS Interface Driver, Fmax 600MHz - XFAB 180nm
SLVS Interface Driver, Fmax 600MHz - XFAB 180nm...
157
1.0
UMC 0.18um VCC Detector
The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of its power supply, AV28. The normal operating voltage range of AV28 is ...
158
1.0
UMC 0.18um VCC Detector
The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of input voltage AV33. The normal operation voltage range of AV33 is 3.0v...
159
1.0
SMIC 0.13um 1.2V Power On Reset
Present Power on Reset generates system reset pulses (POR12) when 1.2V power supplier (VIN12) is turned on. This IP can not operate stand-alone becaus...
160
1.0
SMIC 0.13um 1.2V Power On Reset
Present Power on Reset generates system reset signal (POR12) when 1.2V power supplier (VIN12) is turned on. This IP can not operate stand-alone becaus...
161
1.0
SMIC 0.13um 1.8V Power On Reset
Present Power on Reset generates system reset pulses (POR18) when 1.8V power supplier (VIN18) is turned on. This IP can not operate stand-alone becaus...
162
1.0
SMIC 0.13um 1.8V Power On Reset
Present Power on Reset generates system reset signal (POR18) when 1.8V power supplier (VIN18) is turned on. This IP can not operate stand-alone becaus...
163
1.0
SMIC 0.13um 2.4V Power on Reset
The present Power on Reset IP generates system reset signal (POR18, low level reset) when 3.3v power supplier (VIN18) is turned on. This IP cannot ope...
164
1.0
SMIC 0.13um 3.3V Power On Reset
Present Power on Reset generates system reset pulses (POR33) when the 3.3V power supplier (VIN33) is turned on. This IP can not operate stand-alone be...
165
1.0
SMIC 0.13um 3.3V Power On Reset
Present Power on Reset generates system reset signal (POR33) when 3.3V power supplier (VIN33) is turned on. This IP can not operate stand-alone becaus...
166
1.0
SMIC 0.13um 3.3V Trimming Block
This IP is suitable for voltage trimming. It provides 8 trimming bits and assures high reliability for trimming success. This particular physical IP ...
167
1.0
SMIC 0.13um 3.3V/1.2V Power on Reset
The present Power-On-Reset circuit generates system reset pulses (RST) when both the 3.3V and 1.2V power suppliers are turned on. Output signal RST12 ...
168
1.0
SMIC 0.13um 5v-3.3v/1.2v Battery Charger
Based on SMIC 0.13µm 3.3v/1.2v Logic process, current design of the Battery Charger IP is a complete constant current/constant voltage linear charger ...
169
1.0
SMIC 0.13um LVDS Receiver
The LVDS Receiver IP is designed to support Single Link transmission between Host and Flat Panel Display with up to SXGA+ resolution and Dual Link tra...
170
1.0
SMIC 0.13um LVDS Transmitter
The LVDS transmitter converts 28-bit data into 4-pair LVDS data stream. A phase-locked transmit clock is transmitted in parallel with the data stream ...
171
1.0
SMIC 0.13um MMC
Targeted in SMIC 0.13μm 1.2v/3.3v logic process, this IP integrates five sub-modules: 1.8~3.3v(1.62~3.6V) to 1.2v Regulator, 200MHz Ring Oscillator an...
172
1.0
SMIC 0.13um Programmable Gain
The S13V33_PGA_01 integrates: one MIC input gain boost amplifier, two 2-channel programmable gain amplifiers, two 3-1 input signal MUXs, and MICBIAS o...
173
1.0
SMIC 0.13μm 5V-3.3V 350mA Synchronous Buck DC-DC
The IP is a high efficiency, low ripple, current mode buck switching regulator with internal synchronous MOS switches, eliminating the need for extern...
174
1.0
SMIC 0.13μm 5v-3.3v Power Regulator
This IP is a Low-Dropout (LDO) 5V to 3.3V power regulator in SMIC 0.13μm 3.3V/1.2V Logic process. When it works in regulation region, the max rated ou...
175
1.0
SMIC 0.18um 1.8V Power on Reset
The present Power-On-Reset circuit generates System Reset Pulses (RST) when the 1.8V power supply is turned on. The output signal RST18 is of positive...
176
1.0
SMIC 0.18um 1.8v RC Oscillator
The present IP is a RC oscillator with one external resistor to generate 25~50 MHz clock. Its power supply is 1.8v....
177
1.0
SMIC 0.18um 1.8V/3.3V Power Switch
The SMIC18_PSW_02 is a 3.3V PMOS power switch connecting the main supply and the core area. This IP includes a 3.3V input and a 3.3V output with one e...
178
1.0
SMIC 0.18um 1.8V/3.3V Power Switch
The SMIC18_PSW_02B is a 3.3V PMOS power switch connecting the main supply and the core area. This IP includes a 3.3V input and a 3.3V output with one ...
179
1.0
SMIC 0.18um 3.3V Trimming Block
This IP is suitable for voltage trimming. It provides 6 trimming bits and assures high reliability for trimming success. This particular physical IP h...
180
1.0
SMIC 0.18um 3.3V Trimming Block
This IP is suitable for voltage trimming. It provides 8 trimming bits and assures high reliability for trimming success....
181
1.0
SMIC 0.18um 3.3V Trimming Block
This IP is suitable for voltage trimming. It provides 3 trimming bits and assures high reliability for trimming success. Before trimming, the output p...
182
1.0
SMIC 0.18um 3.3v-1.8v Power Regulator
Power Regulator, also called Voltage Regulator, is an on-chip device which converts an external high voltage power supply into suitable power supplies...
183
1.0
SMIC 0.18um 3.3v-1.8v Power Regulator
Power Regulator, also called Voltage Regulator, is an on-chip device which converts an external high voltage power supply into suitable power supplies...
184
1.0
SMIC 0.18um 3.3v-1.8v Power Regulator
Power Regulator, also called Voltage Regulator, is an on-chip device which converts an external high voltage power supply into suitable power supplies...
185
1.0
SMIC 0.18um 3.3v��1.8v Power Regulator
Power Regulator, also called Voltage Regulator, is an on-chip device which converts an external high voltage power supply into suitable power supplies...
186
1.0
SMIC 0.18um Clock Slicer
Present IP (clock slicer) is to re-shape the sinusoidal clock signal to a proper CMOS signal before its delivery to digital logic....
187
1.0
SMIC 0.18um Low Leakage MMC Card
To provide a solution of MMC cards, SMIC18LL_MMC_01 is integrated together by four independent IPs: SMIC18LL_PRG_03, SMIC18LL_ROSC_01, SMIC18LL_VDT_01...
188
1.0
SMIC 0.18um Low Leakage MMC Card
To provide a solution of the MMC cards, SMIC18LL_MMC_04 is integrated together by three independent IPs: SMIC18LL_PRG_03, SMIC18LL_ROSC_01 and SMIC18L...
189
1.0
SMIC 0.18um Low Leakage MMC Card
To provide a solution of the MMC cards, SMIC18LL_MMC_04B is integrated together by three independent IPs: SMIC18LL_PRG_03, SMIC18LL_ROSC_01 and SMIC18...
190
1.0
SMIC 0.18um Low Leakage VCC Detector
The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of its power supplies, AV18 and AV33. The normal operation voltage levels...
191
1.0
SMIC 0.18um Low Leakage VCC Detector
The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of its power supplies, AV18 and AV33. The normal operation voltage levels...
192
1.0
SMIC 0.18um LVDS Transceiver
The LVDS transceiver IP is a Serializer/Deserializer (SERDES) pair that transparently translates 12–bit parallel bus into serial stream. This single s...
193
1.0
SMIC 0.18um MMC_07C
To provide a solution to MMC cards, SMIC18_MMC_07C_4IN1 is consolidated by four independent IPs: SMIC18_PRG_03E_33T18V60_240mA, SMIC18_ROSC_01D_55M, S...
194
1.0
SMIC 0.18um MMC_07E
To provide a solution to MMC cards, SMIC18_MMC_07E_4IN1 is consolidated by four independent IPs: SMIC18_PRG_03E_33T18V60_160mA, SMIC18_ROSC_01E_48M, S...
195
1.0
SMIC 0.18um POWER_IP
The IC Card Interface IP provides power supply for either 1.8V, 3V, or 5V Smart/SAM cards, and realizes level-shift between smart card controller and ...
196
1.0
SMIC 0.18um PWM Boost DC/DC Controller
This is a boost DC/DC switching controller that adopts PWM (Pulse-Width-Modulation) control scheme. It accepts input voltage (Vin) from 0.95V to 1.8V,...
197
1.0
SMIC 0.18um Random Code Generator
SMIC18_RCG_02 is to generate random code....
198
1.0
SMIC 0.18um Reduced Swing Differential Signaling Transmitter
This is an embedded bus transmitter for RSDS™ (Reduced Swing Differential Signaling) interface. RSDS is an intra-panel interface bus standard develope...
199
1.0
SMIC 0.18um Stereo Speaker Drivers
The SMIC18_SPKDRIVER_01 specifies the design of stereo speaker drivers. The drivers defined in this specification use class-AB structure to reduce pow...
200
1.0
SMIC 0.18um VCC Detector
The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of its power supplies, AV18 and AV33. The normal operational voltage leve...