Design & Reuse
5492 IP
901
1.0
5.0V Programmable Gain Amplifier
The L7SPGA4B10G IP is programmable gain amplifier (PGA), which consists of single ended amplifier, input and output switches, 14-selectable gain paths...
902
1.0
5.0V/3.3V-->3.3V/1.5V capacitor-free regulator
Supports capacitor-less application with fast transient; Typical output 1.50V, output range is from 1.40V to 1.65V; 200mA driving ability...
903
1.0
0.1 to 1 GHZ Frequency Divider
...
904
1.0
1.2GHz Fractional-N/SSC PLL
This PLL is a 0.85V single supply-voltage phase-locked loop (PLL) with a wide-output-frequency-range for frequency synthesis. It consists of a phase f...
905
1.0
2.2GHz Fractional-N/SSC PLL
The ll_pll2651s01_ln28lpp_7002 is a 1.8V/1.0V dual supply-voltage phase locked loop (PLL) with a wide-output-frequency-range for frequency synthesis. ...
906
1.0
3.2GHz Fractional-N/SSC PLL
The ll_plla0536a01_ln05lpe_4007002 is a 1.8V/0.75V dual supply-voltage phase locked loop (PLL) with a wide-output-frequency-range for frequency synthe...
907
1.0
1.2GHz Integer PLL
The ll_pll0518s01_ln05lpe_4007011 is a 0.85V single supply-voltage phase-locked loop (PLL) with a wide-output-frequency-range for frequency synthesis....
908
1.0
3.2GHz Integer PLL
This is a 1.8V/0.75V dual supply-voltage phase locked loop (PLL) with a wide-output-frequency-range for frequency synthesis. It consists of a phase-fr...
909
1.0
1.2V Low Voltage Detector (LVD), Fujitsu 90nm
The AR22F01 is a mass-production proven low voltage detector (LVD) IP. The LVD monitors analog pad power supply levels to prevent possible damage of c...
910
1.0
1.2V Power On Reset
The power on reset can provide system a reset signal to SoC. The power on reset contains a voltage detection block and a delay cell. The power on rese...
911
1.0
1.2V to 0.75V Linear Voltage Regulator
The LDO provides 0.75V regulated output voltages. It consists of a BGR, regulator cores and LVD. It can deliver up to 900mA. The operational junction ...
912
1.0
1.2V to 0.85V Linear Voltage Regulator
The low-dropout regulator provides 0.85V regulated output voltage. It consist of a regulator core and a buffer. It can deliver up to 200mA. The operat...
913
1.0
4.3GHz Integer PLL
This PLL is a 1.8V/0.8V dual supply-voltage phase locked loop (PLL) with a wide-output-frequency-range for frequency synthesis. It consists of a phase...
914
1.0
3.3V to 1.8V Linear Voltage Regulator
The linear voltage regulator provides 1.8V regulated voltage. It consists of a voltage regulator and a reference generator. It can deliver up to 350mA...
915
1.0
3.3V-->1.5V capacitor-free LDO
...
916
1.0
3.3V-->1.5V ultra-low power LDO
...
917
1.0
0.4-4GHz Wideband Low Noise Amplifier
...
918
1.0
2.4GHz Integer PLL
This PLL is a 1.2V/0.75V dual supply-voltage phase locked loop (PLL) with a wide-output-frequency-range for frequency synthesis. It consists of a phas...
919
1.0
2.4GHz-2.5GHz, 25dBm Power Amplifier
...
920
1.0
1.5-GHz Jitter-optimized low-power digital PLL
Perceptia’s DeepSub pPLL03 series PLLs are low-cost low-power low-jitter PLLs, for foundry processes from 28 to 180-nm. They are typically used togeth...
921
1.0
4.5GHz Fractional-N/SSC PLL
The ll_pllf0434s02_ln04lpp_3207002 is a 1.2V/0.75V dual supply-voltage phase locked loop (PLL) with a wide-output-frequency-range for frequency synthe...
922
1.0
2.5GHz Fractional-N/SSC PLL
The ll_pll0533s01_ln05lpe_4006000 is a 1.8V/0.85V dual supply-voltage phase locked loop (PLL) with a wide-output-frequency-range for frequency synthes...
923
1.0
3.5GHz Fractional-N/SSC PLL
The ll_pll1445s01_ln14lpp_34201 is a 1.8V/0.8V dual supply-voltage phase locked loop (PLL) with a wide-output-frequency-range for frequency synthesis....
924
1.0
2.5GHz Integer PLL
The ll_pll2555s01_ln28lpp_7001 is a 1.8V/1.0V dual supply-voltage phase locked loop (PLL) with a wide-output-frequency-range for frequency synthesis. ...
925
1.0
4.5GHz Integer PLL
This PLL is a 1.8V/0.75V dual supply-voltage phase locked loop (PLL) with a wide-output-frequency-range for frequency synthesis. It consists of a phas...
926
1.0
0.5GHz-1.5GHz Voltage Controlled Oscillator
RJVC01 is 0.5 - 1.15 GHz, voltage controlled oscillator. It can operate at 1.2 V supply and consumes only 2.5 mA current. The tuning bandwidth of the ...
927
1.0
1.5GHz-1.7GHz Low Noise Amplifier
RJL02 is a narrow band low noise amplifier. This LNA is designed on 0.18 SiGe BiCMOS process. This device is design for GPS system application....
928
1.0
2.5V 12Bit pipeline analog to digital converter
TheS65LLV25_ADC_13 IP is a 2.5V 12Bit pipeline analog to digital converter capable of running at up to 100MHz conversion rate with 2Vp-p input range....
929
1.0
1.5V Power On Reset
The power on reset can provide system a reset signal to SoC. The power on reset contains a voltage detection block and a Buffer. The power on reset de...
930
1.0
6.6GHz Fractional-N/SSC PLL
This PLL is a 1.8V/0.85V dual supply-voltage phase locked loop (PLL) with a wide-output-frequency-range for frequency synthesis. It consists of a phas...
931
1.0
6.6GHz Integer PLL
The ll_pll0516s01_ln05lpe_4007011 is a 1.2V single supply-voltage phase locked loop (PLL) with a wide-output-frequency-range for frequency synthesis. ...
932
1.0
1.7 to 2.5 GHz PCS/WCDMA band Low Noise Amplifier
...
933
1.0
1.7-2.5GHz Low Noise Amplifier with High OIP3
...
934
1.0
0.7-3 GHz Low noise amplifier
The RGLNA01 is 0.7 to 3.0 GHz high efficiency GaAs Enhancement mode pHEMT Low Noise Amplifier IP Block .The device is designed for use in the IEEE 802...
935
1.0
0.75V Power On Reset
The power on reset (POR) can provide a reset signal to SoC. The POR contains a voltage detection block and a delay cell. The POR detects supply voltag...
936
1.0
1.7GHz-2.7GHz Two Stage Low Noise Amplifier
A high efficiency CMOS 2 stage Low Noise Amplifier designed on 0.18µm SiGe BiCMOS process. The device is designed for use in the 802.11b/g and WLAN MI...
937
1.0
0.80-0.96 GHz 2Watts, 900MHz band Power Amplifier
...
938
1.0
0.8V Power On Reset
The power on reset can provide system a reset signal to SoC. The power on reset contains a voltage detection block and a delay cell. The power on rese...
939
1.0
1.8V Power On Reset
The power on reset can provide system a reset signal to SoC. The power on reset contains a voltage detection block and a delay cell. The power on rese...
940
1.0
1.8V to 0.75V Linear Voltage Regulator
The linear voltage regulator provides 0.75V regulated voltage. It consists of a voltage regulator and a reference generator. It can deliver up to 80mA...
941
1.0
0.8V to 0.75V Low-Dropout Voltage Regulator
The digital low-dropout regulator provides 0.75V regulated output voltage. It consist of a global controller and 16 local LDOs. It can deliver up to 6...
942
1.0
1.8V to 0.8V Linear Voltage Regulator
The linear voltage regulator provides 0.8V regulated voltage. It consists of a voltage regulator and a reference generator. It can deliver up to 100mA...
943
1.0
1.8V to 1.0V Linear Voltage Regulator
The linear voltage regulator provides 1.0V regulated voltage. It consists of a voltage regulator and a reference generator. It can deliver up to 50mA....
944
1.0
1.8V to 1.2V Linear Voltage Regulator
The linear voltage regulator provides 1.2V regulated output voltage. It consists of a regulator core and a reference generator. It can deliver up to 1...
945
1.0
4.9 to 5.9GHz Power Amplifier
...
946
1.0
3.93216GHz Fractional-N PLL
The ll_pllf0840s01_ln08lpp_306011 is a 1.8V/0.75V dual supply-voltage phase locked loop (PLL) for frequency synthesis. It consists of a phase frequenc...
947
1.0
30 mA flash LDO voltage regulator (output voltage 1.8 V)
The voltage regulator consists of a differential amplifier, pass transistor and resistor's divider. Differential amplifier compares reference voltage ...
948
1.0
30 mA LDO voltage regulator (output voltage 0.9 to 1.3 V)
055GF_LDOVR_03 the voltage regulator is used to maintain a stable output voltage at varying input voltage. The block consists of a differential amplif...
949
1.0
30 mA linear voltage regulator
The voltage regulator is CMOS low dropout linear voltage regulator with 30 mA output current capability. The device have high output voltage accuracy,...
950
1.0
10 MHz RC oscillator
IP is a low power high resolution RC oscillator nominally operates at 10 MHz output clock from a 1.2 V supply. No external components are required. Th...