Design & Reuse
5492 IP
2101
1.0
GSMC 0.13μm Low Power Process 2.6~3.63v -> 1.5v Power Regulator
Targeted in GSMC 0.13μm Low Power 1.5V/3.3V 1P6M process, current design of Power Regulator is to provide 1.5v power supply which is regulated from th...
2102
1.0
GSMC 0.13μm Low Power Process VCC Detector
This IP contains two Voltage Detector (VDT) circuits and a Power-On-Reset (POR) circuit. The voltage detectors monitor the supply voltage of Bus Suppl...
2103
1.0
GSMC 0.18um 1.8v APLL
The GSMC18_PLL_01 is developed as a macro cell for clock generation. It can generate a stable high-speed clock from a slower clock signal. The output ...
2104
1.0
CSMC 0.18um 1.8v APLL
This IP is a programmable Analog PLL suitable for high speed clock generation. High speed VCO can run from 300MHz to 600MHz. By setting DM[4:0] and DN...
2105
1.0
GSMC 0.18um 1.8v POR
The present IP is a Power On Reset (POR) circuit without external resistors or capacitors. Its power supply is 1.8v....
2106
1.0
GSMC 0.18um 1.8v RC Oscillator
The present IP is a RC oscillator with one external resistor to generate 25~50 MHz clock. Its power supply is 1.8v....
2107
1.0
GSMC 0.18um 1.8v RC Oscillator
The present IP is a RC oscillator with one external resistor to generate 25~50 MHz clock. Its power supply is 1.8v....
2108
1.0
GSMC 0.18um 1.8v Ring Oscillator
The present IP is a Ring Oscillator. Its output frequency is about 55 MHz. The frequency can be fairly accurate (+/-10%) by trimming the resistance. I...
2109
1.0
GSMC 0.18um 1.8v Ring Oscillator
The present IP is a Ring Oscillator. Its output frequency can be changed by adjusting the external resistor. Its power supply is 1.8v +/-10%. A bandga...
2110
1.0
GSMC 0.18um 1.8v Ring Oscillator
The present IP is a Ring Oscillator. Its power supply is 1.8v ±10% and the output frequency CLK is about 40 MHz. The frequency can be fairly accurate ...
2111
1.0
GSMC 0.18um 11Bit 500Ksps R2R DAC
GSMC18_R2RDAC_04 is a 11Bit 500KHz DAC IP. It implements an 8-bit (from D [0] to D [7]) R2R_Ladder and 3-bit thermometer decoder architecture. It is s...
2112
1.0
GSMC 0.18um 3.3v
This IP is a programmable Analog PLL suitable for high speed clock generation. High speed VCO can run around 100MHz. By setting different values of DM...
2113
1.0
GSMC 0.18um 3.3v APLL
Present IP is a programmable Analog PLL suitable for high speed clock generation. High speed VCO can run from 150MHz to 266MHz. By setting different v...
2114
1.0
GSMC 0.18um 3.3v APLL
This IP is a programmable Analog PLL suitable for high speed clock generation. High speed VCO can run from 300MHz to 600MHz. By setting different valu...
2115
1.0
GSMC 0.18um 3.3V Power on Reset
The present Power-On-Reset circuit generates system reset pulses (RST) when the power supplier is from 1.62V to 3.6V. The output signal RST is positiv...
2116
1.0
GSMC 0.18um 3.3v RC Oscillator
The present IP is a RC oscillator with internal R and C to generate 32¡À20%KHz clock. Its power supply is 3.3V....
2117
1.0
GSMC 0.18um 3.3v RC oscillator with internal R and C to generate 32±20%KHz clock.
The present IP is a RC oscillator with internal R and C to generate 32KHz±30% clock. Its power supply is 3.3V....
2118
1.0
GSMC 0.18um 3.3V Trimming Block
This IP is suitable for voltage trimming. It provides 2 effuse bits, TRIM[1:0]. Before trimming, TRIM[1:0] are set to 1.8V and the output ports are hi...
2119
1.0
GSMC 0.18um 3.3v-1.8v Power Regulator
This is a 3.3V to 1.8V power regulator based on GSMC 0.18um 1.8V/3.3V D0 Process. In regulated region, the rated output current is <20mA....
2120
1.0
GSMC 0.18um 3.3v-1.8v Power Regulator
Power Regulator, also called Voltage Regulator, is an on-chip device which provides suitable power supply for the core from an external high voltage p...
2121
1.0
GSMC 0.18um 3.3v-1.8v Power Regulator
Power Regulator, also called Voltage Regulator, is an on-chip device which provides suitable power supply for the core from an external high voltage p...
2122
1.0
GSMC 0.18um 3.3v-1.8v Power Regulator
Power Regulator, also called Voltage Regulator, is an on-chip device which provides suitable power supply for the core from an external high voltage p...
2123
1.0
GSMC 0.18um 3.3v-1.8v Random code generator circuit, internal pattern frequency is 750MHz, sampling clock upto 250MHz.
GSMC18_RCG_03 is to generate random code with the sampling clock up to 250MHz....
2124
1.0
GSMC 0.18um 3.3v/1.8v 80mA power regulator
Present project is a regulator that generates 1.8v voltage from 3.3v power supply. Based on the GSMC 0.18um 3.3v process, it provides a maximum curren...
2125
1.0
GSMC 0.18um 3.3v/1.8v Power Regulator
Present project is a regulator that generates 1.8v voltage from 3.3v power supply. Based on the GSMC 0.18um 3.3v process, it provides a maximum curren...
2126
1.0
GSMC 0.18um 5v-3.3v Power Regulator
This IP is a Low-Dropout (LDO) 5V to 3.3V power regulator in GSMC 0.18um 3.3V/1.8V Logic process. When it works in regulation region, the max rated ou...
2127
1.0
GSMC 0.18um 5v-3.3v/1.8v Power Regulator
Based on GSMC 0.18um 3.3v/1.8v Logic process, current design of the Power Regulator is to provide both 3.3v and 1.8v power supplies which are regulate...
2128
1.0
GSMC 0.18um General Process, Low Power circuit design, Diffusion ROM
Based on GSMC 0.13um 1.5V/12V eFlash process, current design of the IP detects light with photodiode. When the incident light power is more than 70mW/...
2129
1.0
GSMC 0.18um Power-On Reset
This is a Power-On-Reset circuit that generates a reset pulse when power supply is on. After the power V18 reaches a specific level, i.e., VTR, it wil...
2130
1.0
GSMC 0.18um VCC Detector
The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of its power supplies, AV18 and AV33. The normal operation voltage levels...
2131
1.0
GSMC 0.18um VCC Detector
The present IP is a VCC Detector (VDT) circuit which detects the core supply and then sends a corresponding control signal to level shift. In specific...
2132
1.0
GSMC 0.18um VCC Detector
The present IP is a VCC Detector (VDT) circuit. It detects the battery voltage level. It will generate two flag signals, VBT21 and VBT36, when VBT3 re...
2133
1.0
GSMC 0.18um VCC Detector
The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of both core (AVDD18) and I/O (AVDD33). It will generate four flag signal...
2134
1.0
GSMC 0.18um Voltage Detector
The present IP is a Voltage Detector (VDT) circuit. Its power supply is 2.7v~3.6v....
2135
1.0
GSMC 0.18um Voltage Detector
The present IP devise a Voltage Detector (VDT) circuit. With the help of a 1.2v input reference, it detects both 3.3v and 1.8v input voltages and it w...
2136
1.0
GSMC 0.18um Voltage Detector
This IP is a Voltage Detector (VDT) circuit for power management application. When the supply voltage (AVDD33) increases above the detection level (VT...
2137
1.0
GSMC 0.18um Voltage Detector
The present IP is a Voltage Detector (VDT) circuit. When the voltage is in the range of VTHL to VTHH, the output, OUT_RD, is generated as a high level...
2138
1.0
GSMC 0.18um Voltage Detector
This IP is a Voltage Detector (VDT) circuit for power management application. When the supply voltage (AVDD33) increases above the detection level (VT...
2139
1.0
GSMC 0.18¦Ìm 1.8v/3.3v Power Switch
The GSMC18_PSW_02 is a PMOS power switch between the main power supply and circuit cell. Its RON is 1ohm....
2140
1.0
GSMC 0.18μm 3.3v-1.8v Noise Current Source
GSMC18_NCS_01 is a Noise Current Source IP. It depicts a current consumption block controlled by random code to draw 0mA~3.2mA noise current consumpti...
2141
1.0
GSMC 0.18µm 5v-5v/3v/1.8v Power Regulator
This IP is a Low-Dropout (LDO) 5V to 5V/3V/1.8V power regulator in GSMC 0.18μm Logic/EFLASH process. The max rated output current of the PRG is 65mA, ...
2142
1.0
TSMC 55nm 1.0/2.5V 32768Hz Crystal Oscillator
This is a 32768Hz crystal oscillator specifically designed for ultra-low power application. The sole power supply is 3.3V, but it can be as low as 1.6...
2143
1.0
TSMC 55nm 12-Bit 8-Input 1M/200k SAR ADC
This analog-to-digital converter uses Successive Approximation Register (SAR) architecture to achieve 12-bit resolution. The IP includes a core intern...
2144
1.0
TSMC 55nm Analog 2-1 MUX
This analog 2-1 MUX is designed for low speed application....
2145
1.0
TSMC 65nm 12-Bit 8-Input 1M/200k SAR ADC
This analog-to-digital converter uses Successive Approximation Register (SAR) architecture to achieve 12-bit resolution. The IP includes a core intern...
2146
1.0
TSMC 65nm Analog 2-1 MUX
This analog 2-1 MUX is designed for low speed application....
2147
1.0
TSMC CL013G 130nm Clock Generator PLL - 136MHz-680MHz
The Clock Generator PLL is designed to multiply an input clock by an integer between 1 and 4096. It does not provide any deskew functionality. It cont...
2148
1.0
TSMC CL013G 130nm Clock Generator PLL - 272MHz-1360MHz
The Clock Generator PLL is designed to multiply an input clock by an integer between 1 and 4096. It does not provide any deskew functionality. It cont...
2149
1.0
TSMC CL013G 130nm Clock Generator PLL - 68MHz-340MHz
The Clock Generator PLL is designed to multiply an input clock by an integer between 1 and 4096. It does not provide any deskew functionality. It cont...
2150
1.0
TSMC CL013G 130nm DDR DLL - 107MHz-535MHz
The DDR DLL uses a reference clock to establish a time base in order to delay arbitrary (nonperiodic) strobe signals by precise fractions of the clock...