Analog & Mixed Signal IP Core

The ODT-ADS-7B64G-3 is an ultra-high-bandwidth time-interleaved ADC designed in a 3nm CMOS process. This 7-bit, 64GSPS ADC supports ac-coupled input ...

2152

0.0

8-channel 8-bit voltage comparator

028TSMC_COMP_01 is a comparator that compares a reference voltage to an analog input voltage and contains 8 input channels with a programmable thresho...

2153

0.0

8-Channel Ultra-Low Power Capacitive Touch Interface

The MVCTCH01 ASIC is an ultra-low power and high sensitivity 8-channel capacitive touch interface that is designed to be easily integrated with capaci...

2154

0.0

4-GHz Jitter-optimized low-power digital PLL

Perceptia’s DeepSub pPLL03 series PLLs are low-cost low-power low-jitter PLLs, for foundry processes from 28 to 180-nm. They are typically used togeth...

2155

0.0

2.0-3.6V to 1.0-1.4V step down DC/DC converter

055UMC_DCDC_01 is high-efficiency step-down DC-DC switching buck converter targeted for operation from 2.0V to 3.6V input voltage. It is able to suppl...

2156

0.0

1.024 MHz RC oscillator

IP is a low power high resolution RC oscillator nominally operates at 1.024 MHz output clock from a 1.2 V supply. No external components are required....

2157

0.0

0.075 - 3 GHz quadrature former

This device is designed to generate a quadrature local oscillator signal. A quadrature generator circuit constructed in CMOS logic and consists of tw...

2158

0.0

0.1 to 150 MHz LNA with 5 dB NF and 57 dB gain

065TSMC_LNA_09 is used to amplify signal from the radio receiver input in band up to 150MHz. LNA has a low noise figure, high linearity and wide gain ...

2159

0.0

0.1 to 25 MHz Phase-frequency detector with charge pump

180TSMC_PFD_03 is a phase-frequency detector (PFD) forms control signal for VCO tuning. PFD compares phases of divided VCO signal and divided referenc...

2160

0.0

1.12V/10uA, 20uA, 30uA, 50uA, 100uA Reference current and voltage source with temperature sensor

065TSMC_RS_03 is a reference current and voltage source (RS), used to supply analog blocks. It is based on bandgap reference voltage source, forming t...

2161

0.0

1.16 to 1.26 and 1.56 to 1.61 GHz low noise amplifier with 27.5dB gain

350AMS_LNA_04 is a common receiver front-end device which is used to provide impedance matching to off-chip circuits and to perform first step low noi...

2162

0.0

1.16 V Bandgap voltage reference

180TSMC_BVR_01 a bandgap voltage reference produces temperature independent voltage level around 1.16V (at Bangap_Vref pin) using temperature dependen...

2163

0.0

1.17 V Reference current and voltage source

Reference current and voltage source is used to supply any analog blocks. It is based on the reference voltage source forming temperature compensation...

2164

0.0

1.18 V/ 1.02...5.1 uA Reference current and voltage source

Reference current and voltage source is used to supply any analog blocks. It is based on the reference voltage source forming temperature compensation...

2165

0.0

1.19 V Reference voltage source

Reference voltage source forms temperature-compensated voltage level equal to the width of the band gap of silicon due to mutual compensation of tempe...

2166

0.0

1.19 V Reference voltage source

Reference voltage source forms temperature-compensated voltage level equal to the width of the band gap of silicon due to mutual compensation of tempe...

2167

0.0

0.2 to 3 GHz power amplifier

130iHP_PA_03 is based on AB class power amplifier with a preamplifier. The block is designed to set the required output signal and provides a wide ran...

2168

0.0

1.2 V Bandgap voltage reference

Bandgap voltage reference forms temperature-compensated voltage level equal to the width of the band gap of silicon due to mutual compensation of temp...

2169

0.0

1.2 V Bandgap voltage reference

Bandgap voltage reference forms temperature-compensated voltage level equal to the width of the band gap of silicon due to mutual compensation of temp...

2170

0.0

1.22 V Reference voltage source

Reference voltage source forms temperature-compensated voltage level equal to the width of the band gap of silicon due to mutual compensation of tempe...

2171

0.0

1.22V/1uA Reference voltage and current source

180XFAB_RS_01 consists of a bandgap reference voltage regulator, formed temperature and power supply variations independent voltage and bias, formed r...

2172

0.0

2.25-3.60V to 1.0-1.4V step down DC/DC converter

055TSMC_DCDC_03 is a DC/DC voltage converter designed to operate in the mode of a step-down synchronous pulse voltage regulator with load capacity fro...

2173

0.0

4.25V...15V to 3.3V/120mA LDO

4.25V...15V to 3.3V/120mA LDO...

2174

0.0

1.2V->0.8V Low/Ultra-low Power LDO Comparator IP Core

A 1.2V->0.8V Low/Ultra-low Power LDO Comparator (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 0.8 volts...

2175

0.0

4.2V->3.3V Low/Ultra-low Power LDO IP Core

A 4.2V -> 3.3V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 3.3 volts from a 4.2-volt in...

2176

0.0

3.3 - 4.2V to -3.7V step-down DC/DC converter

180XFAB_DCDC_05 is capable to generate -4.2V ÷ -3.3V (-3.7V typical value) voltage and can maintain 50uA load for -3.7V output. The block consists of ...

2177

0.0

3.3 - 4.2V to 0 - 200V step-up DC/DC converter

180XFAB_DCDC_03 is a DC/DC step-up voltage converter that generates +200V output voltage from 3.3V to 4.2V. The DC/DC is designed for no load at the o...

2178

0.0

3.3 - 4.2V to 0 - minus 100V step-down DC/DC converter

180XFAB_DCDC_02 is a DC/DC step-down voltage converter that generates -100V output voltage from 3.3V to 4.2V power supply. The output voltage can be s...

2179

0.0

3.3 - 4.2V to 0 - minus 200V step-down DC/DC converter

180XFAB_DCDC_04 is a DC/DC step-down voltage converter that generates -200V output voltage from 3.3V to 4.2V. The DC/DC consists of OTA and transistor...

2180

0.0

3.3-4.2V to 0-100V step-up DC/DC converter

180XFAB_DCDC_01 is a DC/DC step-up voltage converter that generates +100V output voltage from 3.3V to 4.2V power supply. The output voltage can be smo...

2181

0.0

0.32 to 10 MHz Phase-frequency detector

180TSMC_PFD_02 is a phase-frequency detector (PFD) forms a control signal for VCO tuning. PFD compares phases of a divided VCO signal and a divided re...

2182

0.0

3.3V - >1.2V/1.1V/0.9V Low Power Cap-less LDO IP Core

A 3.3V - >1.2V/1.1V/0.9V Low Power Cap-less LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 0.9 volts...

2183

0.0

3.3V ->1.1V/0.9V Cap-less LDO IP Core

A 3.3V -> 1.1V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.1 volts from a 3.3-volt in...

2184

0.0

3.3V 100MHz Oscillator IO Inline Pad Set

The 3.3V 100MHz Oscillators library provides a 100 MHz crystal oscillator macro I/O cell. An adapter cell is included to utilize this oscillator with ...

2185

0.0

3.3V to 1.0V, 3.0A Step-down DC-DC converter

High-efficiency step-down DC-DC converter is targeted for operation from 3.3V input voltage. It is able to supply circuits with programmable output vo...

2186

0.0

3.3V to 1.8V, 0.7A Step-down DC-DC converter

High-efficiency step-down DC-DC converter is targeted for operation from 3.3V input voltage. It is able to supply circuits with programmable output vo...

2187

0.0

3.3V to 2.5V 50mA LDO voltage regulator

028SAM_LDO_05 is external-capacitor-based Linear Regulator in Samsung 28 LPP to generate SoC voltage supply voltage. The block provided with stable an...

2188

0.0

3.3V- >1.2/1.1V/0.9V Ultra-low Power LDO IP Core

A 3.3V->1.2V/1.0V/0.8V Low/Ultra-low Power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 0.8 volts ...

2189

0.0

3.3V->1.1V/0.9V/0.8V Low/Ultra-low Power LDO IP Core

A 3.3V -> 1.1V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.1 volts from a 3.3-volt in...

2190

0.0

3.3V->1.2V/1.0V/0.8V Low/Ultra-low Power LDO IP Core

A 3.3V->1.2V/1.0V/0.8V Low/Ultra-low Power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 0.8 volts ...

2191

0.0

3.3V->1.5V Cap-less LDO IP Core

A 3.3V->1.5V Cap-less LDO LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.5 volts from a 3.3-volt i...

2192

0.0

3.3V->1.5V Low Power LDO IP Core

A 3.3V->1.5V Low Power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.5 volts from a 3.3-volt inpu...

2193

0.0

3.3V->1.8V/1.2V Low/Ultra-low Power LDO IP Core

A 3.3V->1.8V/1.2V Low/Ultra-low Power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.2 volts from ...

2194

0.0

3.3V->2.5V Low/Ultra-low Power LDO IP Core

A 3.3V->2.5V Low/Ultra-low Power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 2.5 volts from a 3.3...

2195

0.0

3.4 to 11 MHz 8rd order low pass filter

The cell is the 8rd order Butterworth low pass filter with cut-off frequency adjustment. The block has two channels of differential inputs and outputs...

2196

0.0

0.4-4GHz Wideband Low Noise Amplifier

...

2197

0.0

2.4GHz-2.5GHz, 25dBm Power Amplifier

...

2198

0.0

0.4V/250nA Bandgap voltage and current sources

055GF_BVR_01 the bandgap voltage reference generates temperature-compensated voltage due to mutual compensation of temperature dependence of bipolar d...

2199

0.0

5.5 MHz RC oscillator

065TSMC_OSC_03 is a low power high resolution RC oscillator nominally operates at 5.5 MHz output clock from a 1.2 V supply. The block consumes only 4....

2200

0.0

6.5 to 23 MHz 3rd order low pass filter

Low pass filter (3rd order Chebyshev filter) is based on the gyrators with cut-off frequency adjustment in wide range (6.5…23 MHz ). There are two mod...

45|

46|

...|