Design & Reuse
Catalog of SIP Cores
System on Chip design resources
arrow A/D Converter (ADC) (532)
arrow Amplifier (116)
arrow Analog Comparator (18)
arrow Analog Filter (28)
arrow Analog Front Ends (41)
arrow Analog Multiplexer (2)
arrow Analog Subsystems (5)
arrow Clock Synthesizer (98)
arrow D/A Converter (DAC) (225)
arrow DC-DC Converter (96)
arrow DLL (744)
arrow Oscillator (344)
arrow Oversampling Modulator (8)
arrow Power Management (945)
arrow RF Modules (103)
arrow Sensor (53)
arrow Sensors and Monitors (109)
arrow Temperature Sensor (133)
arrow Other (273)
3873 IP
2201
0.0
3.5 to 7 GHz Voltage controlled oscillator
055TSMC_VCO_01 is voltage controlled oscillator (VCO) designed to generate a high frequency signal in the range from 3.5 to 7 GHz. The VCO consist of ...
2202
0.0
1.5-GHz Jitter-optimized low-power digital PLL
Perceptia’s DeepSub pPLL03 series PLLs are low-cost low-power low-jitter PLLs, for foundry processes from 28 to 180-nm. They are typically used togeth...
2203
0.0
0.5GHz-1.5GHz Voltage Controlled Oscillator
RJVC01 is 0.5 - 1.15 GHz, voltage controlled oscillator. It can operate at 1.2 V supply and consumes only 2.5 mA current. The tuning bandwidth of the ...
2204
0.0
1.5GHz-1.7GHz Low Noise Amplifier
RJL02 is a narrow band low noise amplifier. This LNA is designed on 0.18 SiGe BiCMOS process. This device is design for GPS system application....
2205
0.0
2.5V 100MHz Oscillator Inline I/O Pad Set
The OSx_BI_032_12V oscillator is designed to generate an asynchronous on-chip clock signal with an appropriate external oscillator crystal. The design...
2206
0.0
9.6 MHz to 25 MHz Low pass filter
Low pass filter (3rd order Chebyshev filter) is based on the gyrators with cut-off frequency adjustment in wide range. There are two modes for cut-off...
2207
0.0
0.6 V Bandgap voltage reference
Bandgap voltage reference forms temperature-compensated voltage level due to mutual compensation of temperature dependence of bipolar diodes and resis...
2208
0.0
1.65V Low Noise Microphone Bias for Microcontroller Business in TSMC 55nm
MICBIAS is a low noise microphone-bias-voltage generator that provides 1.65V highly regulated output. The output voltage can be programmed with 6 trim...
2209
0.0
0.6V/10, 20uA Reference voltage and current source
055TSMC_RS_02 consists of bandgap voltage reference and two voltage-to-current converters: one of them is based on external resistor and thus could be...
2210
0.0
0.6V/10u, 20uA, 100nA, 200nA Reference voltage and current source
055TSMC_RS_05 is a reference voltage and current source that consists of bandgap voltage reference, two voltage-to-current converters and current-volt...
2211
0.0
0.6V/10uA, 20uA Bandgap and V2I converter (Voltage to current)
55TSMC_BGV_02 is a reference voltage and current source that consists of bandgap voltage reference, voltage-to-current converter and current-voltage b...
2212
0.0
1.7 to 2.5 GHz PCS/WCDMA band Low Noise Amplifier
...
2213
0.0
1.7-2.5GHz Low Noise Amplifier with High OIP3
...
2214
0.0
0.7-3 GHz Low noise amplifier
The RGLNA01 is 0.7 to 3.0 GHz high efficiency GaAs Enhancement mode pHEMT Low Noise Amplifier IP Block .The device is designed for use in the IEEE 802...
2215
0.0
0.75-1.20 GHz quadrature former
The quadrature former with phase correction. Quadrature signal is formed in the trigger cell by means of division by 2. D-trigger synchronize output ...
2216
0.0
1.7GHz-2.7GHz Two Stage Low Noise Amplifier
A high efficiency CMOS 2 stage Low Noise Amplifier designed on 0.18µm SiGe BiCMOS process. The device is designed for use in the 802.11b/g and WLAN MI...
2217
0.0
2.8 to 3.3 GHz Voltage controlled oscillator
Voltage–controlled oscillator (VCO) is the generator that can be tuned over a wide range of frequencies by applying a control voltage to it. The devic...
2218
0.0
1.8-2.6V to 2.7-3.0V step up DC/DC converter
130iHP_DCDC_01 is a high-performance step up DC/DC converter designed to operate with 1.8-2.6V input voltage. The output voltage can be adjusted from ...
2219
0.0
0.80-0.96 GHz 2Watts, 900MHz band Power Amplifier
...
2220
0.0
1.8V->0.8V Low Power LDO IP Core
A 1.8V -> 0.8V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 0.8 volts from a 1.8-volt in...
2221
0.0
1.8V->1.2V Low/Ultra-low Power LDO IP Core
A 1.8V->1.2V Low/Ultra-low Power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.2 volts from a 1.8...
2222
0.0
4.9 to 5.9GHz Power Amplifier
...
2223
0.0
10 bit 3Msps Ultra low power SAR ADC IP core
High performance, 10-bit resolution, 3-Msps sample rate Ultra Low Power Mixed-signal SAR ADC IP Core. Leading edge systems on chip (SoCs) for microcon...
2224
0.0
30 mA flash LDO voltage regulator (output voltage 1.8 V)
The voltage regulator consists of a differential amplifier, pass transistor and resistor's divider. Differential amplifier compares reference voltage ...
2225
0.0
40 mA LDO voltage regulator (3.3/5.0V to 1.8V)
180TSMC_LDO_20 is LDO to convert IO voltage 3.0V÷5.5V to 1.8V and designed to supply integrated circuits with stable and precise voltage with load up ...
2226
0.0
30 mA LDO voltage regulator (output voltage 0.9 to 1.3 V)
055GF_LDOVR_03 the voltage regulator is used to maintain a stable output voltage at varying input voltage. The block consists of a differential amplif...
2227
0.0
20 mA LDO voltage regulator (output voltage 1.1V/1.2V/1.3V/1.4V)
055TSMC_LDO_09 IP is cap-based LDO voltage regulator designed to convert IO voltage 2.5V to 1.2V and supply analogy circuits with load up to 20mA. The...
2228
0.0
10 mA LDO voltage regulator (output voltage 1.1V/1.2V/1.3V/1.4V)
055TSMC_LDO_02 is a low drop out voltage regulator designed to supply integrated circuits with stable and precise voltage. The LDO inputs voltage VDD...
2229
0.0
20 mA LDO voltage regulator (output voltage 2.7 V)
350AMS_LDOVR_01 the voltage regulator consists of differential amplifier which compares reference voltage 1.13V with voltage from feedback divider. It...
2230
0.0
30 mA linear voltage regulator
The voltage regulator is CMOS low dropout linear voltage regulator with 30 mA output current capability. The device have high output voltage accuracy,...
2231
0.0
10 MHz RC oscillator
IP is a low power high resolution RC oscillator nominally operates at 10 MHz output clock from a 1.2 V supply. No external components are required. Th...
2232
0.0
10 to 200 MHz DLL-based frequency multiplier
DLL-based frequency multiplier is a simple to configure and operate block, combining, small area and low current consumption. Block wakes up in “pass-...
2233
0.0
10 to 40 MHz crystal oscillator
180GF_OSC_01 is a crystal oscillator with Pierce architecture. The block consists of a feedback amplifier, amplitude detector, reference source with P...
2234
0.0
20 to 50 MHz crystal oscillator
055TSMC_OSC_01 is a reference frequency generator designed to form a reference signal in the frequency range from 10 to 50MHz. The block consists of a...
2235
0.0
10 to 50 MHz crystal oscillator
180TSMC_OSC_04 is a reference frequency generator designed to form a reference signal in the frequency range from 10 to 50MHz. Both an internal and an...
2236
0.0
60 to 83 MHz High linearity intermediate frequency amplifier
Intermediate-frequency amplifier consists of 2-stages amplifier, output buffer with tunable gain and two LDO voltage regulators. Each stage of the am...
2237
0.0
30-200 MHz DLL-based frequency multiplier
055TSMC_DLL_01 is a frequency multiplier that combines low phase jitter of clock signal, small area and low current consumption. Block wakes up in “pa...
2238
0.0
10-20GHz Differential Amplifier
The GRDA1 is 10 GHz to 20 GHz differential amplifier designed on 2 um InGaP HBT process. The gain of GRDA1 is 5 dB typically with flatness of ±3dB ove...
2239
0.0
10-bit 1-channel 1 MSPS SAR ADC
090TSMC_ADC_02 is a 10-bit 1-channel successive-approximation register (SAR) analog to digital converter (ADC) circuit with sample rates up to 1 MSPS....
2240
0.0
10-bit 1-channel 1 MSPS SAR ADC
250iHP_ADC_09 is 10-bit 1 MSPS ADC employs high-performance single ended successive approximation architecture with embedded 8-input signal multiplexe...
2241
0.0
10-bit 1-channel 1 to 100 MSPS current DAC
The 10-bit dual high-speed DAC is based on current steering architecture, which provides high-speed conversion rate and good dynamic performance. DAC ...
2242
0.0
10-bit 1-channel 10 to 150 MSPS SAR ADC
055TSMC_ADC_13 is a 10-bit 1-channel SAR ADC with sample rate from 10 to 150 MSPS that operates with 1V peak-to-peak input signal. The block consists ...
2243
0.0
10-bit 1-channel 100 MHz current DAC
The 10-bit dual high-speed DAC is based on current steering architecture, which provides high-speed conversion rate and good dynamic performance. DAC ...
2244
0.0
10-bit 1-channel 100 MSPS ADC
The 10-bit 100 MSPS ADC employs a high-performance front-end sample-and-hold with differential multi-stage pipelined architecture and output error cor...
2245
0.0
10-bit 1-channel 2.6 kSPS SAR ADC
IP 250iHP_ADC_09 is 10-bit 2.6 kSPS ADC employs high-performance single ended successive approximation architecture with embedded 8-input signal multi...
2246
0.0
10-bit 1-channel constant power DAC
10-bit constant power DAC employs a current steering DAC architecture with control loop, which adjusts DAC input code to keep power dissipated in term...
2247
0.0
10-bit 1-channel constant power DAC
10-bit Constant power DAC employs a current steering DAC architecture with control loop, which adjusts DAC input code to keep power dissipated in term...
2248
0.0
10-bit 1-channel constant power DAC
10-bit constant power DAC employs a current steering DAC architecture with control loop, which adjusts DAC input code to keep power dissipated in term...
2249
0.0
10-bit 1MHz R-2R DAC
10-bit 1MHz R-2R DAC, VREF=2.56V, voltage step = 2.5mV, INL<+/+1LSB...
2250
0.0
10-bit 4-channel 5 to 100 MSPS pipeline ADC
065TSMC_ADC_09 employs a high-performance front-end sample-and-hold with differential multistage pipelined architecture and output error correction lo...