Design & Reuse
5497 IP
4051
0.0
GF L90GOD 90nm Multi Phase DLL - 360MHz-1800MHz
The Multi Phase DLL is designed for high-speed interface applications. The DLL generates precise multi-phase clocks directly from the reference clock....
4052
0.0
GF L90GOD 90nm Multi Phase DLL - 90MHz-450MHz
The Multi Phase DLL is designed for high-speed interface applications. The DLL generates precise multi-phase clocks directly from the reference clock....
4053
0.0
GF L90LP 90nm IoT PLL - 30MHz-375MHz
The IoT PLL is designed for very low power, sipping only 45uW at 30MHz and running from core power. It has a wide frequency range with multiplication ...
4054
0.0
GF L90LP 90nm Multi Phase DLL - 150MHz-750MHz
The Multi Phase DLL is designed for high-speed interface applications. The DLL generates precise multi-phase clocks directly from the reference clock....
4055
0.0
GF L90LP 90nm Multi Phase DLL - 300MHz-1500MHz
The Multi Phase DLL is designed for high-speed interface applications. The DLL generates precise multi-phase clocks directly from the reference clock....
4056
0.0
GF L90LP 90nm Multi Phase DLL - 75MHz-375MHz
The Multi Phase DLL is designed for high-speed interface applications. The DLL generates precise multi-phase clocks directly from the reference clock....
4057
0.0
RF Multiply by 2, 20GHz to 40GHz
RF Multiply by 2, 20GHz to 40GHz, Vdd=800mV, Idd=5mA...
4058
0.0
RF Multiply by 2, 40GHz to 80GHz
RF Multiply by 2, 40GHz to 80GHz,VDD=800mV, Idd=5mA...
4059
0.0
RF SP3T Switch used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW02C RF SP3T Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
4060
0.0
RF SPDT Switch from 10-30 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW01C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
4061
0.0
RF SPDT Switch from 2-44 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW03C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
4062
0.0
RF SPDT Switch from 20-40 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW05C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
4063
0.0
RF SPDT Switch from 20-40 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW04C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
4064
0.0
BG0V608LPP is a analog cell that provides a low-spread Reference Current
BG0V608LPP is a analog cell that provides a low-spread Reference Current to ADC IP. This analog cell uses Bandgap voltage to generate well-controlled...
4065
0.0
BG0V6S180NM is a analog cell that provides a low-spread Reference Current
BG0V6S180NM is a analog cell that provides a low-spread Reference Current to ADC IP. This analog cell uses Bandgap voltage to generate well-controlle...
4066
0.0
BG0V6T180NM is a analog cell that provides a low-spread Reference Current
BG0V6T180NM is a analog cell that provides a low-spread Reference Current to ADC IP. This analog cell uses Bandgap voltage to generate well-controlle...
4067
0.0
BG0V6T28HPC is a analog cell that provides a low-spread Reference Current
BG0V6T28HPC is a analog cell that provides a low-spread Reference Current to ADC IP. This analog cell uses Bandgap voltage to generate well-controlle...
4068
0.0
BG0V6T55NM is a analog cell that provides a low-spread Reference Current
BG0V6T55NM is a analog cell that provides a low-spread Reference Current to ADC IP. This analog cell uses Bandgap voltage to generate well-controlled...
4069
0.0
BG0V6U28HPC is a analog cell that provides a low-spread Reference Current
BG0V6U28HPC is a analog cell that provides a low-spread Reference Current to ADC IP. This analog cell uses Bandgap voltage to generate well-controlle...
4070
0.0
BG0V6U40nm is a analog cell that provides a low-spread Reference Current
BG0V6U40nm is a analog cell that provides a low-spread Reference Current to ADC IP. This analog cell uses Bandgap voltage to generate well-controlled...
4071
0.0
BG1V2P110NM is a analog cell that provides a low-spread Reference Current
BG1V2P110NM is a analog cell that provides a low-spread Reference Current to ADC IP. This analog cell uses Bandgap voltage to generate well-controlle...
4072
0.0
BG1V2T55NM is a analog cell that provides a low-spread Reference Current
BG1V2T55NM is a analog cell that provides a low-spread Reference Current to ADC IP. This analog cell uses Bandgap voltage to generate well-controlled...
4073
0.0
BG1V2U55EHV is a analog cell that provides a low-spread Reference Current
BG1V2U55EHV is a analog cell that provides a low-spread Reference Current to ADC IP. This analog cell uses Bandgap voltage to generate well-controlle...
4074
0.0
PGA for 32b Analog Front End for Seismic Precision application in 180nm
The high-performance PGA is highly integrable with our 32b & 24b ADC IP and hence can be combined to form a programmable gain Analog front end for pre...
4075
0.0
BGADC6MLFR6LP is a analog cell that provides a low-spread Reference Current
BGADC6MLFR6LP is a analog cell that provides a low-spread Reference Current to ADC IP (AD12BSAR6MLFR6LP). This analog cell uses Bandgap voltage to gen...
4076
0.0
IGAPLLT06A, TSMC CLN28HPM/CLN28HPC+ Spread Spectrum PLL
The IGAPLLT06A is a customized Spread Spectrum Phase Locked Loop (SSPLL) without external components and is designed to provide a stable and accurate ...
4077
0.0
IGAPLLT08A, TSMC CLN28HPC & CLN28HPC+ General Purpose PLL
The IGAPLLT08A is a general purpose deskew Phase Locked Loop (PLL) without external component. It is designed to provide a stable and accurate refer...
4078
0.0
IGAPLLT12A, TSMC CLN28HPC+ General Purpose PLL
The “IGAPLLT12A” is a general purpose de-skew phase locked loop (PLL) without external component. The IGAPLLT12A incorporates several frequency divide...
4079
0.0
IGARFCT01A, TSMC CLN28HPM 40MHz Resistance to Frequency Converter
The IGARFCT01A is a 40MHz high frequency stability resistance to frequency converter (RFC) without external component. It is designed to provide a sta...
4080
0.0
IGARFCT02A, TSMC CLN28HPM 1MHz Resistance to Frequency Converter
The IGARFCT02A is a 1MHz resistance to frequency converter (RFC) without external component. It is designed to provide a stable and accurate reference...
4081
0.0
IGATHMS05A, TSMC CLN40LP Thermal Sensor Comparator
The IGATHMS05A is a temperature sensor comparator for temperature shut down or temperature sense system. This IP contains an internal temperature diod...
4082
0.0
IGATHMV07A, TSMC CLN12FFC Thermal Sensor ADC
IGATHMV07A is a voltage and temperature sensor which is built in an internal thermal diode and an Analog-to-Digital Converter (ADC) for both voltage a...
4083
0.0
5GHz RF Buffer
5GHz RF Buffer, Vdd=800mV, Idd=6mA...
4084
0.0
5GHz to 13.5GHz Phase Locked Loop (PLL) IP Block TSMC 130nm
The PLL13G is a ultra-low power phase locked loop (PLL) intellectual property (IP) block. It features a very small area footprint, with exception...
4085
0.0
1GHz to 3GHz, 6MHz to 100MHz Fractional-N LC Phase-Locked Loop
180TSMC_PLL_10 is designed to generate a high frequency signal in a range from 1GHz to 3GHz and a low frequency clock signal in a range from 6MHz to 1...
4086
0.0
2GHz-6GHz High Efficiency Broadband Low Noise Amplifier
The RS03 is 2 to 6 GHz; high efficiency Broadband Single Stage Low noise amplifier, designed on 0.35-ìm SiGe BiCMOS technology. The device is designed...
4087
0.0
2GHz-6GHz Low noise amplifier
...
4088
0.0
2GHz-6GHz Voltage Controlled Oscillator
RJVC02 is 2.0 - 6.0 GHz, voltage controlled oscillator. It can operate at 1.8 V supply and consumes only 1.0 mA current. The tuning bandwidth of the o...
4089
0.0
BGR + V-I Bandgap Reference Circuit
HCLTech offers IP Bandgap (BGR) bgr_1p2_t40_v1 generates precision reference voltage (0.4V ~ 1.2V) and current reference (1.005µA ~ 8.07µA) with varia...
4090
0.0
XH018 buffered voltage reference cell
The VREF cell of the nSBG_XF180_1V8 library is a buffered high precision bandgap reference voltage generator IP cell powered at 1.8V ±10% (bandgap) an...
4091
0.0
Charge pump
Charge pump (CP) is a switched current sources controlled by phase-frequency detector which injects or removes some charge to increase or decrease VCO...
4092
0.0
Charge pump, makes Vin-3.3V voltage
Charge pump, makes Vin-3.3V voltage...
4093
0.0
Phase frequency detector and charge pump
The device consists of phase frequency detector (PFD), charge pump and lock detector (LD). PFD compares phases of a divided VCO signal and a divided...
4094
0.0
Phase frequency detector and charge pump
Phase-frequency detector (PFD) is used to form a control signal VCO tuning. PFD compares phases of divided VCO signals and divided reference oscillato...
4095
0.0
Phase-frequency detector in CMOS logic
The phase-frequency detector (PFD) consists of a signal level converter from differential reduced swing ECL to single-ended full swing CMOS signal and...
4096
0.0
Phase-frequency detector in ECL logic
The phase-frequency detector (PFD) consists of 2 D-trigger with reset from external circuit, performed in ECL logic and multiplexer, which allow to sw...
4097
0.0
The PGAFLT24KU55EHV is a programmable gain instrumentation amplifier has multiple gain settings like 1, 2, 4, 8, 16, 32, 64 and 128 V/V.
The PGAFLT24KU55EHV is a programmable gain instrumentation amplifier has multiple gain settings like 1, 2, 4, 8, 16, 32, 64 and 128 V/V....
4098
0.0
Thermal sensor, 0.6V+8mV*(T-0degC)
Thermal sensor, 0.6V+8mV*(T-0degC)...
4099
0.0
UHS-II Device Controller
UHS-II is Ultra High speed type II controller for high speed transfers used in SD application for High definition contents. Key factors includes reusa...
4100
0.0
Micro Power Bandgap for TSMC 180nm
The OT0120t130 is a 1.2V CMOS micro power CMOS bandgap and current reference cell with sub-µW power dissipation. Can be utilized as non-precision slee...