Analog & Mixed Signal IP Core

The Silicon Creations 3-Supply Power-On Reset circuit provides a fi?xed width reset pulse for chip initialization after power up. The design senses th...

4652

0.0

Free-running on-chip oscillator

Low power relaxation oscillator is a programmable free-running clock generator for coarse clock generation. The design uses a relaxation oscillator wi...

4653

0.0

VREF0V8S08NLL is Reference to drive HS ADC

VREF0V8S08NLL is Reference to drive high speed ADCs...

4654

0.0

VREF0V8T28HPC is Reference to drive HS ADC

VREF0V8T28HPC is Reference to drive high speed ADCs...

4655

0.0

VREF0V8U28HPC is Reference to drive HS ADC

VREF0V8U28HPC is Reference to drive high speed ADCs...

4656

0.0

Frequency Detector

...

4657

0.0

Frequency detector in 28nm

FREQDET28HPC is an IP for detection of input frequency and provides digital output as well as analog output to be used as indicator of the input frequ...

4658

0.0

Frequency Synthesizer PLL

The MXL-PLL-SYN is a high performance PLL based frequency synthesizer implemented using a digital CMOS technology. It is highly integrated and require...

4659

0.0

Frequency-to-Digital Converter for MEMS Resonators

The MVFD01 is a programmable frequency-to-digital converter that is designed to be easily integrated with MEMS resonators. The chip features a versati...

4660

0.0

Driver Amplifier 8-16GHz

...

4661

0.0

Driver Amplifier operating from 1-16 GHz and can be used in wide band application or to drive the high-power amplifier

RFDA07C Driver Amplifier operates from 1 - 16 GHz and can be used in wide band application or to drive the high-power amplifier. The amplifier provide...

4662

0.0

Driver Amplifier operating from 10 - 24 GHz and can be used in wide band application or to drive the high-power amplifier

RFDA02C Driver Amplifier operates from 10 - 24 GHz and can be used in wide band application or to drive the high-power amplifier. The amplifier provid...

4663

0.0

Driver Amplifier operating from 24-30 GHz and can be used in wide band application or to drive the high-power amplifier

RFDA06C Driver Amplifier operates from 24 – 30 GHz and can be used in Ka band application or to drive the high-power amplifier. The amplifier provides...

4664

0.0

Driver Amplifier operating from 35 - 39 GHz and can be used in Ka band applications or to drive the high power amplifier

RFDA13C Driver Amplifier operates from 35 - 39 GHz and can be used in Ka band applications or to drive the high power amplifier. The amplifier provide...

4665

0.0

Driver Amplifier operating from 35 - 46 GHz and can be used in Ka / V band applications or to drive the high-power amplifier

RFDA12C Driver Amplifier operates from 35 - 46 GHz and can be used in Ka / V band applications or to drive the high-power amplifier. The amplifier pro...

4666

0.0

Driver Amplifier operating from 37 - 40 GHz and can be used in Ka band applications or to drive the high-power amplifier.

RFDA11C Driver Amplifier operates from 37 - 40 GHz and can be used in Ka band applications or to drive the high-power amplifier. The amplifier provide...

4667

0.0

Process Monitor

HCLTech Offers IP Process Monitor IP (hcl_procmon_t40_v2) consists of three ring oscillators namely RVT Ring Oscillator, Thick oxide Ring Oscillator, ...

4668

0.0

Process/Voltage/ Temperature Sensor

INNOSILICON™ PVT Sensor IP is designed for on-chip monitoring of processes, voltage, and temperature variations. It is a critical component in modern ...

4669

0.0

Programmable 5-bit CMOS low-frequency divider

The programmable CMOS low-frequency divider configuration of asynchronous programmable impulse counter, control logic and output buffer. The block i...

4670

0.0

Programmable 6-bit CMOS frequency divider

The programmable 6-bit CMOS frequency divider is a set of two independent circuits. One of them is designed using 6-bit counter and is able to change ...

4671

0.0

Programmable 9-bit CMOS frequency divider (2…511 dividing ratio)

The programmable CMOS frequency divider is a set of 8 serially connected dividers with the varied dividing ratio 2/3. This structure is especially eff...

4672

0.0

Programmable 9-bit CMOS low-frequency divider (5...511 dividing ratio)

The programmable CMOS low-frequency divider design is based on the 9-bit counter. Since this structure consists of the static triggers, current consum...

4673

0.0

Programmable CMOS frequency divider (32...16383 dividing ratio)

The programmable CMOS frequency divider is a set of serially connected dividers with the varied dividing ratio 2/3. This structure is especially effec...

4674

0.0

Programmable CMOS frequency divider (56..16383 dividing ratio)

The cell is 14-bit programmable frequency divider. It consists of CMOS prescaler with variable dividing ratio 8/9 controlled by 3-bit swallow counter ...

4675

0.0

Programmable CMOS HF divider (16…4095 dividing ratio)

The programmable CMOS frequency divider consists of two independent circuits. The first one a set of 8 serially connected dividers with the varied div...

4676

0.0

Programmable CMOS PLL high-frequency divider

The CMOS PLL high-frequency divider consists of the converter of a differential input signal to an unipolar signal with a supply voltage peak-to-peak,...

4677

0.0

Programmable CMOS PLL high-frequency divider

The CMOS PLL high-frequency divider consists of the converter of a differential input signal to an unipolar signal with a supply voltage peak-to-peak,...

4678

0.0

Programmable CMOS PLL high-frequency divider

The divider consists of the input signal preamplifier (buffer), the converter of a differential input signal to an unipolar signal with a supply volta...

4679

0.0

Programmable frequency divider (56 to 16383 dividing ratio)

The cell is 14-bit programmable frequency divider. It consists of ECL prescaler with variable dividing ratio 8/9 controlled by 3-bit swallow counter a...

4680

0.0

Programmable gain amplifier

250iHP_PGA_01 is a programmable gain amplifier (PGA) with low-pass filter (LPF). The block consists of 2 amplification stages with tunable (5-bit cont...

4681

0.0

Programmable gain amplifier PGA for Industrial process control and low power sensors

The high-performance PGA is highly integrable with our 24b ADC IP and hence can be combined to form a programmable gain Analog front end for precision...

4682

0.0

Programmable gain amplifier PGA for Industrial process control and low power sensors

The high-performance PGA is highly integrable with our 24b ADC IP and hence can be combined to form a programmable gain Analog front end for precision...

4683

0.0

Programmable LDO voltage regulator (output voltage 1.6 to 2.2 V)

The regulator stabilizes the external voltage (supply voltage) and forms an output level of the specified value. Adjustment is carried out by positive...

4684

0.0

Programmable LDO voltage regulator (output voltage 2.5 V to 2.7 V)

The voltage regulator consists of differential amplifier which compares reference voltage with voltage from feedback divider. It adjusts the impedance...

4685

0.0

Programmable LDO voltage regulator (output voltage 2.5 V to 2.7 V)

The voltage regulator consists of differential amplifier which compares reference voltage with voltage from feedback divider. It adjusts the impedance...

4686

0.0

Programmable LDO voltage regulator (output voltage 2.5 V to 2.7 V)

The voltage regulator consists of differential amplifier which compares reference voltage with voltage from feedback divider. It adjusts the impedance...

4687

0.0

Programmable Low Pass Filter

The WEA50175LPF18CH322G is a leapfrog low pass filter with programmable cut-off frequency. The filter response is 3rd order Chebyschev. The low pass f...

4688

0.0

Front End Module operating from 2 – 7 GHz and can be used in S / C band for Wi-Fi 6 & SATCOM applications.

RFFEM02C Front End Module operates from 2 – 7 GHz and can be used in S / C for Wi-Fi 6 & SATCOM applications. The input and output are matched to 50 o...

4689

0.0

Front End Module operating from 24 – 30 GHz and can be used in low power Ka band applications

RFFEM01C Front End Module operates from 24 – 30 GHz and can be used in low power Ka band application. The input and output are matched to 50 ohms with...

4690

0.0

Cross-Correlator Matrix 64x64

PMCC_XCM_64x64_D IP block is a low-power array of 1GHz clocked Cross-Correlator cells that are synchronously acquiring two sets of 64x2-bit data strea...

4691

0.0

Cross-Correlator With 64x2 Channels

PMCC_XCM_64x64 is an IP block capable of calculating the cross-correlations between 64x2 analog signals supplied to the inputs ARM1 and ARM2. The IP b...

4692

0.0

Error comparator, for PWM generation in the DCDC

Error comparator, forms base for PWM generation in the DCDC regu...

4693

0.0

True-ULP 32.768kHz RTC Oscillator in Silterra 0.18um

This macro-cell is a true ultra-low-power, general purpose 32.768kHz internal oscillator core consuming 120nA when fully functional. A 4-bit digital b...

4694

0.0

HS bootstrap driver for HS NMOS gate voltage generation

HS bootstrap driver for HS NMOS gate voltage generation...

4695

0.0

HS current protection circuit

HS current protection circuit...

4696

0.0

HS current replica block, 1:100'000

HS current replica block, 1:100'000, for HS switch current measurement...