Design & Reuse
Catalog of SIP Cores
System on Chip design resources
5596 IP
4701
0.0
Power switch
SGC21913_01_GF_22FDSOI is a low quiescent power switch solution for integration on SoC. Offering soft start, output pull-down option (in power down mo...
4702
0.0
Power-on Reset
IP 250iHP_PoR_01 is power-on reset unit which produces a reset signal after rising supply voltage to produce the initial state of the triggers. The bl...
4703
0.0
Power-On Reset - Flexible Threshold (1­-1.3V), Ultra Low Current (100nA) Silterra 0.18 μm
This macro-cell is an ultra low consumption Power-On Reset (POR) core designed for SilTerra 0.18µm CL180G CMOS technology. The threshold sensing volta...
4704
0.0
Power-On Reset - Threshold (1.6V­1.8V), Low Current (1.5µA) Silterra 0.18 μm
This macro-cell is a low consumption Power-On Reset (POR) core designed for SilTerra 0.18µm CL180GH5 5V CMOS technology. The threshold sensing voltage...
4705
0.0
Power-On-Reset IP
INNOSILICON™ Power-On-Reset (POR) IP provides reliable reset functions for a variety of applications. It is powered by an analog supply and monitors b...
4706
0.0
Downconverter IR SSB Mixer used in receives
RFDN02C (DNC Mixer) is IR SSB Mixer used in receive application. The process used to design DNC Mixer is 0.1um GaAs pHEMT. This Mixer employs two resi...
4707
0.0
Up convert LO reject Mixer used in RF transceiver applications
RFUD01C (UPC Mixer) is LO reject Mixer used in RF transceiver applications. The process used to design UPC Mixer is 0.1um GaAs pHEMT. This is singly b...
4708
0.0
Up to +/-90V low power high-voltage single-ended amplifier
180XFAB_OpAmp_01 is two-stage amplifier. The first (low-voltage) cascade provides pre-amplification and matching of the common-mode component of the s...
4709
0.0
APC - Advanced Power Controller on GF 22FDSOI
SGC21412_01_GF_22FDSOI is an Advanced Power Controller (APC) for integration in SoC. Including all the necessary auxiliary supply, monitoring, protect...
4710
0.0
Special Purpose Low (Statistical) offset Operation Amplifier
The WEAOPSPLO18PI18RO12M22G is a special purpose low offset buffer for bias generator that provides a buffered ouput for the Temperature Sensor. The O...
4711
0.0
Special Purpose Low offset Operational Amplifier
The WEAOPSLO18NI18RO12M22G is a special purpose low offset and low noise opamp. The opamp architecture is two-stage Miller with RC compensation. The o...
4712
0.0
Special Purpose Low offset Operational Amplifier
The WEAOPSLOSP18NI18RO12M22G is a special purpose low offset buffer for bias generator that provides a buffered output for the bandgap voltage.The OpA...
4713
0.0
Spread Spectrum PLL
The MXL-PLL-SS-R is a high performance PLL based Spread Spectrum Clock Generator implemented using a digital CMOS technology. It is highly integrated...
4714
0.0
Frac-N PLL(SF 28nm, LN28FDS)
PLL2860X is a 1.8V/1.0V dual supply-voltage phase locked loop (PLL) with a wide-output-frequency-range for frequency synthesis. It consists of a p...
4715
0.0
Frac-N PLL(SF 4nm, LN04LPP)
PLLF0434X is a 1.2V/0.75V dual supply-voltage phase locked loop (PLL) with a wide-output-frequency-range for frequency synthesis. It consists of a...
4716
0.0
Frac-N PLL(SF 8nm, LN08LPP)
PLLF0842X is a 1.8V/0.75V dual supply-voltage phase locked loop (PLL) with a wide-output-frequency-range for frequency synthesis. It consists of a...
4717
0.0
Frac-N PLL(SF 8nm, LN08LPP)
PLLF0834X is a 1.8V/0.75V dual supply-voltage phase locked loop (PLL) with a wide-output-frequency-range for frequency synthesis. It consists of a...
4718
0.0
Fractional N-PLL
The MXL-PLL-FRAC is a high performance Fractional-N PLL implemented using a digital CMOS technology. It is highly integrated and requires no external ...
4719
0.0
Fractional-N PLL for Performance Computing in TSMC N5/N4
Perceptia’s DeepSub™ pPLL03F is a PLL featuring low-jitter and compact area suitable for clocking applications with critical timing requirements at fr...
4720
0.0
Fractional-N PLL for Performance Computing in TSMC N6/N7
Perceptia’s DeepSub™ pPLL03F is a PLL featuring low-jitter and compact area suitable for clocking applications with critical timing requirements at fr...
4721
0.0
Precision Power-on Reset Generator
The Silicon Creations 3-Supply Power-On Reset circuit provides a fi?xed width reset pulse for chip initialization after power up. The design senses th...
4722
0.0
Free-running on-chip oscillator
Low power relaxation oscillator is a programmable free-running clock generator for coarse clock generation. The design uses a relaxation oscillator wi...
4723
0.0
VREF Voltage Reference Nano Power Series (400 nA) - UMC 130nm
The SGC21303 is a voltage reference optimized for ultra compact ultra low power applications. The voltage reference has been optimized for area and po...
4724
0.0
VREF Very High PSRR & Low Quiescent Band Gap (90 dB) - GLOBALFOUNDRIES 40nm
The SGC21300 is a very high PSRR, very low noise band gap voltage reference that provides a fixed voltage outputs from inputs between 1.8V and 5.5V. T...
4725
0.0
VREF Very High PSRR & Low Quiescent Band Gap (90 dB) - GLOBALFOUNDRIES 55nm
The SGC21300 is a very high PSRR, very low noise band gap voltage reference that provides a fixed voltage outputs from inputs between 1.8V and 5.5V. T...
4726
0.0
VREF Very High PSRR & Low Quiescent Band Gap (90 dB) - GLOBALFOUNDRIES,65nm
The SGC21300 is a very high PSRR, very low noise band gap voltage reference that provides a fixed voltage outputs from inputs between 1.8V and 5.5V. T...
4727
0.0
VREF Very High PSRR & Low Quiescent Band Gap (90 dB) - TSMC 28nm
The SGC21300 is a very high PSRR, very low noise band gap voltage reference that provides a fixed voltage outputs from inputs between 1.8V and 5.5V. T...
4728
0.0
VREF Very High PSRR & Low Quiescent Band Gap (90 dB) - TSMC 40nm
The SGC21300 is a very high PSRR, very low noise band gap voltage reference that provides a fixed voltage outputs from inputs between 1.8V and 5.5V. T...
4729
0.0
VREF Very High PSRR & Low Quiescent Band Gap (90 dB) - TSMC 65nm
The SGC21300 is a very high PSRR, very low noise band gap voltage reference that provides a fixed voltage outputs from inputs between 1.8V and 5.5V. T...
4730
0.0
VREF Very High PSRR & Low Quiescent Band Gap (90 dB) - TSMC 65nm
The SGC21300 is a very high PSRR, very low noise band gap voltage reference that provides a fixed voltage outputs from inputs between 1.8V and 5.5V. T...
4731
0.0
VREF Very High PSRR & Low Quiescent Band Gap (90 dB) - UMC 110nm
The SGC21300 is a very high PSRR, very low noise band gap voltage reference that provides a fixed voltage outputs from inputs between 1.8V and 5.5V. T...
4732
0.0
VREF Very High PSRR & Low Quiescent Band Gap (90 dB) - UMC 130nm
The SGC21300 is a very high PSRR, very low noise band gap voltage reference that provides a fixed voltage outputs from inputs between 1.8V and 5.5V. T...
4733
0.0
VREF0V8S08NLL is Reference to drive HS ADC
VREF0V8S08NLL is Reference to drive high speed ADCs...
4734
0.0
VREF0V8T28HPC is Reference to drive HS ADC
VREF0V8T28HPC is Reference to drive high speed ADCs...
4735
0.0
VREF0V8U28HPC is Reference to drive HS ADC
VREF0V8U28HPC is Reference to drive high speed ADCs...
4736
0.0
Frequency Detector
...
4737
0.0
Frequency detector in 28nm
FREQDET28HPC is an IP for detection of input frequency and provides digital output as well as analog output to be used as indicator of the input frequ...
4738
0.0
Frequency Synthesizer PLL
The MXL-PLL-SYN is a high performance PLL based frequency synthesizer implemented using a digital CMOS technology. It is highly integrated and require...
4739
0.0
Frequency-to-Digital Converter for MEMS Resonators
The MVFD01 is a programmable frequency-to-digital converter that is designed to be easily integrated with MEMS resonators. The chip features a versati...
4740
0.0
Driver Amplifier 8-16GHz
...
4741
0.0
Driver Amplifier operating from 1-16 GHz and can be used in wide band application or to drive the high-power amplifier
RFDA07C Driver Amplifier operates from 1 - 16 GHz and can be used in wide band application or to drive the high-power amplifier. The amplifier provide...
4742
0.0
Driver Amplifier operating from 10 - 24 GHz and can be used in wide band application or to drive the high-power amplifier
RFDA02C Driver Amplifier operates from 10 - 24 GHz and can be used in wide band application or to drive the high-power amplifier. The amplifier provid...
4743
0.0
Driver Amplifier operating from 24-30 GHz and can be used in wide band application or to drive the high-power amplifier
RFDA06C Driver Amplifier operates from 24 – 30 GHz and can be used in Ka band application or to drive the high-power amplifier. The amplifier provides...
4744
0.0
Driver Amplifier operating from 35 - 39 GHz and can be used in Ka band applications or to drive the high power amplifier
RFDA13C Driver Amplifier operates from 35 - 39 GHz and can be used in Ka band applications or to drive the high power amplifier. The amplifier provide...
4745
0.0
Driver Amplifier operating from 35 - 46 GHz and can be used in Ka / V band applications or to drive the high-power amplifier
RFDA12C Driver Amplifier operates from 35 - 46 GHz and can be used in Ka / V band applications or to drive the high-power amplifier. The amplifier pro...
4746
0.0
Driver Amplifier operating from 37 - 40 GHz and can be used in Ka band applications or to drive the high-power amplifier.
RFDA11C Driver Amplifier operates from 37 - 40 GHz and can be used in Ka band applications or to drive the high-power amplifier. The amplifier provide...
4747
0.0
Process Monitor
HCLTech Offers IP Process Monitor IP (hcl_procmon_t40_v2) consists of three ring oscillators namely RVT Ring Oscillator, Thick oxide Ring Oscillator, ...
4748
0.0
Process/Voltage/ Temperature Sensor
INNOSILICON™ PVT Sensor IP is designed for on-chip monitoring of processes, voltage, and temperature variations. It is a critical component in modern ...
4749
0.0
Programmable 5-bit CMOS low-frequency divider
The programmable CMOS low-frequency divider configuration of asynchronous programmable impulse counter, control logic and output buffer. The block i...
4750
0.0
Programmable 6-bit CMOS frequency divider
The programmable 6-bit CMOS frequency divider is a set of two independent circuits. One of them is designed using 6-bit counter and is able to change ...