Design & Reuse
5618 IP
4751
0.0
Low Power 300-600 MHz programmable PLL
The WEAPLL400M22 is a low power integer PLL operating at a single 0.8 V power supply. This PLL has a wide programmable frequency range operation opera...
4752
0.0
Low Power 30mA 10Ghz BW capless IP Core
A 30mA 10GHz BW capless LDO (Low Drop-Out) is a type of voltage regulator that is designed to provide a stable output voltage with a low voltage drop ...
4753
0.0
Low Power 5V - > 1.8V Cap-less LDO IP Core
A 5V -> 1.8V low-power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.8 volts from a 5-volt input ...
4754
0.0
Low Power 5V->2.4V Low noise LDO IP core
A 5V -> 2.4V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 2.4 volts from a 5-volt input ...
4755
0.0
Low Power 5V->3.0V Cap-less LDO IP Core
A 5V -> 3.3V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 3.3 volts from a 5 volt input ...
4756
0.0
Low power 8bit 300Ksps R2R Compact area High performance Silicon Proven DAC IP Core
The 8-bit 300 Ksps DAC IP Core employs a high-performance R2R architecture and provides an optional differential current output or differential voltag...
4757
0.0
Low power 8bit 3Msps SAR ADC in 180nm~12nm
The Actt's SAR ADC IP is a 8-bit resolution, the typical sample rate is 1Msps, differential or single ended multi-channel input on 180nm~12nm Process....
4758
0.0
Low Power Fractional PLL IP(12/16nm, 22nm, 28nm)
Low Power Fractional PLL is a general purpose frequency synthesizer with an input reference frequency range from 10 to 240 MHz and 3:1 output frequenc...
4759
0.0
Low Power High Speed 1.2GHz Frac-N PLL IP Core
A programmable on-the-fly Fractional-N PLL at 1.2GHz is required to lock to an incoming clock source and produce an output clock available at 40nm....
4760
0.0
Low Power High Speed 1GHz Frac-N PLL IP Core
An ultra-low-power programmable fractional-N at 1GHz phase-locked loop (PLL) for frequency synthesis available at 28nm....
4761
0.0
Low Power PLL for 55nm UMC ULP CMOS
The OT3135 is a flexible low power clock multiplier PLL function with a wide range of input and output frequencies, and is designed for UMC 55nm, CM...
4762
0.0
Low power24bitAudio Compact area Silicon Proven DAC IP Core
The 24bit Audio DAC IP Core employs a high-performance architecture and provides an optional differential current output or differential voltage outpu...
4763
0.0
Low PowerHigh Speed 1.6GHz Frac-N PLL IP Core
A programmable on-the-fly Fractional-N PLL at 1.6GHz is required to lock to an incoming clock source and produce an output clock available at 110nm...
4764
0.0
Low Quiescent DC/DC Buck Converter in TSMC 22ULL
Low-quiescent DC/DC buck converter in TSMC 22ULL supporting an 1.62 V to 3.63 V input voltage range with low quiescent current and high efficiency at ...
4765
0.0
Low Quiescent DC/DC Buck Converter in TSMC 22ULL
Low-quiescent DC/DC buck converter in TSMC 22ULL supporting an 1.62 V to 3.63 V input voltage range with low quiescent current and high efficiency at ...
4766
0.0
Low-Area DC/DC Buck Converter
Low-area DC/DC buck converter for battery-powered IoT applications....
4767
0.0
Low-drift voltage precision reference 10ppm accurate for PLC, Precision data acquisitions system
REF2V5L6PPMT180 is Reference that contains two parts, precision reference voltage generator and reference output voltage (REFOUT) buffer. It offers an...
4768
0.0
Low-drift voltage precision reference 10ppm accurate for PLC, Precision data acquisitions system
REF2V5L10PPMS180 is Reference that contains two parts, precision reference voltage generator and reference output voltage (REFOUT) buffer. It offers a...
4769
0.0
Low-drift voltage precision reference 2ppm accurate for PLC, Precision data acquisitions system
REF2V5L2PPMT180 is Reference that contains two parts, precision reference voltage generator and reference output voltage (REFOUT) buffer. It offers an...
4770
0.0
Low-drift voltage precision reference 2ppm accurate for PLC, Precision data acquisitions system
REF2V5L2PPMS180 is Reference that contains two parts, precision reference voltage generator and reference output voltage (REFOUT) buffer. It offers an...
4771
0.0
Low-drift voltage precision reference 6ppm accurate for PLC, Precision data acquisitions system
REF2V5L6PPMS180 is Reference that contains two parts, precision reference voltage generator and reference output voltage (REFOUT) buffer. It offers an...
4772
0.0
Low-leakage LDO in TSMC 22ULL supporting up to 3.63 V input voltage
High-performance LDO regulator to supply noise-sensitive active domains from input voltage up to 3.63 V....
4773
0.0
Low-leakage LDO in TSMC 22ULL supporting up to 3.63 V input voltage
LDO regulator in TSMC 22ULL to supply logic and sensitive domains from input voltage up to 3.63 V...
4774
0.0
Low-Noise Bandgap Reference - Low Noise: 63nV/√Hz, PSRR: -80dB TSMC 0.18μm CMOS (CLM18)
This macro-cell is a low noise, high PSRR voltage reference core designed for TSMC 0.18μm (CLM18) CMOS technology. The core is ideal for applications ...
4775
0.0
Low-noise Regulator for VCO 1V to 0.8V
Noise @ 1MHz offset=2.5nV/Sqrt(Hz), IDD=12mA...
4776
0.0
Low-Power 10-bit SAR ADC - 10 bits, 240kSPS, 8 multiplexed inputs LFoundry 0.15 μm
This macro-cell is a general purpose, 10-bit, 240kSPS, 8-multiplexed input Successive Approximation Register (SAR) Analog-to-Digital Converter (ADC) c...
4777
0.0
Low-power 32 kHz RC oscillator in TSMC 22ULL
Low-power 32 kHz RC oscillator in TSMC 22ULL....
4778
0.0
Low-Power 8-bit SAR ADC - 8 bits, 50kSPS, Low Voltage (1.8V), Low Power (20µA) TowerJazz 0.18 μm
This macro-cell is a low power, general purpose, 8-bit, 50kSPS, Successive Approximation Register (SAR) Analog-to-Digital Converter (ADC) core designe...
4779
0.0
Low-Power Bandgap Reference - Low Integrated Noise (62.5µVrms) in TSMC 40nm
This macro-cell is a low power voltage reference generator core designed for TSMC 40nm CRN40LP CMOS technology. The core is ideal as a general purpose...
4780
0.0
Low-power Power-On-reset design in Samsung Foundries 65nm LFR6LP process
The POR-[1.8-5.5]-[0.9-1.4].01 is a Power-On-Reset designed in Samsung Foundries 65nm LFR6LP process nodes. It is used to monitor AVD and VDD supplie...
4781
0.0
Low-power, high-speed 11-bit SAR ADC TSMC 28nm HPC+
The A11B4G is a low-power, high-speed analog to digital converter (ADC) intellectual property (IP) design block. It is a hybrid successive approximati...
4782
0.0
Low-power, high-speed 11-bit, 8 GSPS Analog to Digital Converter IP block TSMC 28nm HPC+ process
The A11B8G is a low-power, high-speed analog to digital converter (ADC) intellectual property (IP) design block. It is a hybrid successive approximati...
4783
0.0
Low-quiescent DC/DC converter in TSMC 22ULL
Low-quiescent DC/DC converter in TSMC 22ULL 2.5 V process with high efficiency at light load....
4784
0.0
Low-quiescent LDO voltage regulator in TSMC 22ULL 1.8V
Low-quiescent LDO voltage regulator in TSMC 22ULL 1.8V...
4785
0.0
Power Driver and Switch - High Voltage (30V), Load up to 20mA XFAB 0.35 μm
This macro-cell is a general purpose power driver and switch core designed for X-FAB 0.35µm XH035 CMOS technology. The circuit includes two cells that...
4786
0.0
Power Management Unit
PMU IP includes following components: Bandgap reference voltage source, reference current sources and reference frequency generator. Bandgap source fo...
4787
0.0
Power Management Unit
PMU is designed to supply integrated circuits with stable and precise voltage. 055UMC_PMU_01 is a library including RS block and 4 LDOs: LDO1 to suppl...
4788
0.0
Power Management Unit
PMU IP includes following components: Bandgap reference voltage source and reference current sources. Bandgap source forms temperature, power supply a...
4789
0.0
Power Management Unit
250iHP_PMU_05 is power management system, which consists of two parts – Bandgap and 4 LDOs. Bandgap reference voltage source forms temperature and pow...
4790
0.0
Power Management Unit
250iHP_PMU_03 is power management system, which divided in primary unit and up to three secondary units. Primary unit includes bandgap reference volta...
4791
0.0
Power management unit
PMU is designed to supply embedded integrated circuits with stable and precise voltage and 1%-accurate clock frequency. It integrates 4 LDOs and 3 osc...
4792
0.0
Power management unit (0.9V, 1.8V, 3.3V output voltages, 1.2V reference voltage and 10uA/1uA reference currents)
028TSMC_LDO_01 is a Power management unit, designed to supply integrated circuits with stable and precise voltage. IP includes Bandgap block, and 3 LD...
4793
0.0
Power Management Unit (1.1 - 1.4V output voltage, load current 5 mA)
055TSMC_PMU_01 is designed to form stabilized voltage with overcurrent indication (bit Status). The block has configurable output voltage (1.1/1.2/1.3...
4794
0.0
Power management unit (1.2 V output voltage, 945 nA output current)
065TSMC_PMU_01 is designed to supply embedded integrated circuits with stable and precise internal voltage and currents. It integrates power switch el...
4795
0.0
Power Management Unit (2.3 - 3.0V output voltage, load current 20mA)
130iHP_PMU_01 is designed to form stabilized voltage with overcurrent indication (bit OVC). The block has configurable output voltage (2.3 / 2.4 / 2.5...
4796
0.0
Power on Reset
065TSMC_PoR_02 is a Power-on-Reset (PoR) circuit provides a reset signal to the chip when supply voltage reach required level. The block generates res...
4797
0.0
Power on Reset 1.2V
055SMIC_POR_04 provides a reset signal to the chip when supply voltage reach required level. POR generates reset signal depending of the level supply ...
4798
0.0
POWER ON RESET FOR 1.8V SUPPLY
The power-on-reset(POR) generates a reset pulse to ensure that the core processing circuits are in a defined state when the power is ramping up or ram...
4799
0.0
POWER ON RESET FOR 3.3V SUPPLY
The power-on-reset(POR) generates a reset pulse to ensure that the core processing circuits are in a defined state when the power is ramping up or ram...
4800
0.0
POWER ON RESET FOR 5V SUPPLY
The power-on-reset(POR) generates a reset pulse to ensure that the core processing circuits are in a defined state when the power is ramping up or ram...