3051 1.0

SMIC 0.18um 1.8v PLL This IP is a fixed divider Analog PLL suitable for high speed clock generation. High speed VCO can run from 40MHz to 270MHz according to the frequency...

3052 1.0

SMIC 0.18um PLL This IP is a programmable Analog PLL suitable for system clock generation. High speed VCO can run from 150MHz to 250MHz. By setting DM(5:0) and DN(7:0...

3053 1.0

SMIC 0.18um POWER_IP The IC Card Interface IP provides power supply for either 1.8V, 3V, or 5V Smart/SAM cards, and realizes level-shift between smart card controller and ...

3054 1.0

SMIC 0.18um Power-On Reset This is a Power-On-Reset circuit that generates a reset pulse when power supply is on. After the power V18 reaches a specific level, i.e., VTR, it wil...

3055 1.0

SMIC 0.18um 3.3v-1.8v Power Regulator Power Regulator, also called Voltage Regulator, is an on-chip device which converts an external high voltage power supply into suitable power supplies...

3056 1.0

SMIC 0.18um 3v/4.2v->1.8v Power Regulator Present IP is to generate 1.8v supply voltage from an external Button Cell or Lithium Battery. The Lithium Battery will be monitored automatically. Wh...

3057 1.0

SMIC 0.18um 3.3v-1.8v Power Regulator Power Regulator, also called Voltage Regulator, is an on-chip device which provides suitable power supply for the core by regulating the external high...

3058 1.0

SMIC 0.18um 5v-3.3v Power Regulator Based on SMIC 0.18um 3.3v/1.8v Logic Process, current design of a Power Regulator is to provide the 3.3v voltage output regulated from the 5v input su...

3059 1.0

SMIC 0.18um 5v-3.3v Power Regulator Based on SMIC 0.18um 3.3v/1.8v Logic Process, current design of Power Regulator is to provide the 3.3v voltage output regulated from a 5v input supply...

3060 1.0

SMIC 0.18um 5v-3.3v/1.8v Power Regulator Based on SMIC 0.18um 3.3v/1.8v Logic process, current design of the Power Regulator is to provide both 3.3v and 1.8v power supplies which are regulate...

3061 1.0

SMIC 0.18um PWM Boost DC/DC Controller This is a boost DC/DC switching controller that adopts PWM (Pulse-Width-Modulation) control scheme. It accepts input voltage (Vin) from 0.95V to 1.8V,...

3062 1.0

SMIC 0.18um Random Code Generator SMIC18_RCG_02 is to generate random code....

3063 1.0

SMIC 0.18um 1.8v RC Oscillator The present IP is a RC oscillator with one external resistor to generate 25~50 MHz clock. Its power supply is 1.8v....

3064 1.0

SMIC 0.18um 1.8v Ring Oscillator The present IP is a Ring Oscillator. Its output frequency is about 53 MHz. The frequency can be fairly accurate (+/-10%) by trimming the resistance. I...

3065 1.0

SMIC 0.13um 24M Crystal Oscillator This is a crystal oscillator specifically designed for low power application. It is configurable to suit for 2M~32MHz crystals working at fundamental ...

3066 1.0

SMIC 0.18um 1.8v Ring Oscillator Brief Specification The present IP is a Ring Oscillator. Its output frequency is about 55 MHz. The frequency can be fairly accurate (?0%) by trimming the resistance. Its ...

3067 1.0

SMIC 0.18um 1.8v Ring Oscillator The present IP is a Ring Oscillator. Its output frequency can be changed by adjusting the external resistor. Its power supply is 1.8v +/-10%. A bandga...

3068 1.0

SMIC 0.18um Reduced Swing Differential Signaling Transmitter This is an embedded bus transmitter for RSDS™ (Reduced Swing Differential Signaling) interface. RSDS is an intra-panel interface bus standard develope...

3069 1.0

VCC Detector (trigger at 1.4v/1.5v and 2.2v/2.3v) The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of its power supplies, AV18 and AV33. The normal operation voltage levels...

3070 1.0

SMIC 0.18um VCC Detector The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of its power supplies, AV18 and AV33. The normal operational voltage leve...

3071 1.0

SMIC 0.18um Voltage Detector The present IP is a Voltage Detector (VDT) circuit. Its power supply is 2.7v~3.6v....

3072 1.0

SMIC 0.18um VCC Detector The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of its power supply, AV18. The normal operation voltage range of AV18 is ...

3073 1.0

SMIC 0.18um VCC Detector The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of input voltage AV33. The normal operation voltage range of AV33 is 3.0v...

3074 1.0

SMIC 0.18um Voltage Detector The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of its power supply AV33. The normal operation voltage levels of AVDDL an...

3075 1.0

SMIC 0.18um Low Leakage MMC Card To provide a solution of MMC cards, SMIC18LL_MMC_01 is integrated together by four independent IPs: SMIC18LL_PRG_03, SMIC18LL_ROSC_01, SMIC18LL_VDT_01...

3076 1.0

SMIC 0.18um Low Leakage MMC Card To provide a solution of the MMC cards, SMIC18LL_MMC_04 is integrated together by three independent IPs: SMIC18LL_PRG_03, SMIC18LL_ROSC_01 and SMIC18L...

3077 1.0

SMIC 0.18um Low Leakage MMC Card To provide a solution of the MMC cards, SMIC18LL_MMC_04B is integrated together by three independent IPs: SMIC18LL_PRG_03, SMIC18LL_ROSC_01 and SMIC18...

3078 1.0

SMIC 0.18um Low Leakage Power_On Reset This is a Power-On-Reset circuit that generates a reset pulse when power supply is on. After the power AVDD18 reaches a specific level, VTR, it will o...

3079 1.0

SMIC 0.18um Low Leakage 3.3v-1.8v Power Power Regulator, also called Voltage Regulator, is an on-chip device which provides suitable power supply for the core by regulating the external high...

3080 1.0

SMIC 0.18um Low Leakage Ring Oscillator The present IP is a Ring Oscillator. Its output frequency is about 55 MHz. The frequency can be fairly accurate (+/-10%) by trimming the current. Its ...

3081 1.0

SMIC 0.18um Low Leakage VCC Detector The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of its power supplies, AV18 and AV33. The normal operation voltage levels...

3082 1.0

SMIC 0.18um Low Leakage VCC Detector The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of its power supplies, AV18 and AV33. The normal operation voltage levels...

3083 1.0

SMIC 0.25um 2.5V APLL The present IP is a programmable Analog PLL suitable for high speed clock generation. High speed VCO can run up to 280MHz. By setting different values...

3084 1.0

SMIC 0.25um 5v~2.5v Voltage Regulator The present IP is a voltage regulator to generate 2.5v power for on chip circuits. Normally, its power supply is 4.5v~5.5v. The generated power voltag...

3085 1.0

SMIC 0.25um 3.3v-2.5v Power regulator Power Regulator, also called Voltage Regulator, is an on-chip device which converts an external high voltage power supply into suitable power supplies...

3086 2.0

High efficiency and Low BoM DC-DC designed in GF 22FDX eSR-Tugela-OV-LB-Bu-ref-1.9-5.5-0.5-3.3.03_GF_22_FDX is a High efficiency DC-DC converter GF 22FDX with full PWM operation mode which can be configure...

3087 1.0

UMC 0.18um 3.3v APLL This IP is a programmable Analog PLL suitable for high speed clock generation. The high speed VCO can run at about 100MHz. By setting different values...

3088 1.0

UMC 0.18um 3.3v-1.8v 150mA Power Regulator Power Regulator, also called Voltage Regulator, is an on-chip device which provides suitable power supply for the core by regulating the external high...

3089 1.0

UMC 0.18um 5v-3.3v Power Regulator Based on UMC 0.18um 3.3v/1.8v Logic Process, current design of a Power Regulator is to provide a 3.3v voltage output regulated from a 5v input supply ...

3090 1.0

UMC 0.18um 5v-3.3v Power Regulator Based on UMC 0.18um 3.3v/1.8v Logic Process, current design of Power Regulator is to provide the 3.3v voltage output regulated from a 5v input supply....

3091 1.0

UMC 0.18um 1.8v 80MHz Ring Oscillator The present IP is a Ring Oscillator which is controlled by the external 1.2v bandgap reference. Its output clocks can be about 80MHz, 60Mhz, 40MHz or ...

3092 1.0

UMC 0.18um VCC Detector The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of its power supply, AV28. The normal operating voltage range of AV28 is ...

3093 1.0

UMC 0.18um VCC Detector The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of input voltage AV33. The normal operation voltage range of AV33 is 3.0v...

3094 1.0

Charter 0.13um 1.2v APLL This IP is a programmable Analog PLL suitable for high speed clock generation. High speed VCO can run from 50MHz to 500MHz. By setting different value...

3095 1.0

Charter 0.13um 1.2v APLL This IP is a programmable Analog PLL suitable for high speed clock generation. High speed VCO can run from 50MHz to 500MHz. By setting different value...

3096 1.0

GMSC 0.18um MMC including PRG03,VDT01,POR03,ROSC01 To provide a solution to the MMC cards, GSMC18_MMC_03 is consolidated by four independent IPs: GSMC18_PRG_03, GSMC18_ROSC_01, GSMC18_VDT_01 and GSMC18...

3097 1.0

GSMC 0.18um 1.8v APLL The GSMC18_PLL_01 is developed as a macro cell for clock generation. It can generate a stable high-speed clock from a slower clock signal. The output ...

3098 1.0

GSMC 0.18um 3.3v This IP is a programmable Analog PLL suitable for high speed clock generation. High speed VCO can run around 100MHz. By setting different values of DM...

3099 1.0

GSMC 0.18um 3.3v APLL Present IP is a programmable Analog PLL suitable for high speed clock generation. High speed VCO can run from 150MHz to 266MHz. By setting different v...

3100 1.0

GSMC 0.18um 3.3v APLL This IP is a programmable Analog PLL suitable for high speed clock generation. High speed VCO can run from 300MHz to 600MHz. By setting different valu...