Design & Reuse
1881 IP
101
14.0
CXL Controller
Low-latency Controller IP for cache-coherent root-port, end-point, and dual-mode applications The Cadence® Controller IP for CXL provides the logic r...
102
12.0
12-bit, 8 GSPS DAC Ultra Low Power on 7nm
The ODT-DAC-12B8G-7nm is a high-performance current steering 12-bit DAC that operates at an update rate of up to 8GSPS. The DAC uses a proprietary arc...
103
12.0
14-bit, 1200 MSPS Ultra Low Power ADC in 28nm CMOS
The ODT-ADP-14B1P2G-28 is a low power high speed pipelined ADC designed in a 28nm standard CMOS process, implemented using Omni Design's groundbreakin...
104
12.0
Latch-Up Detector
The ODT-LUP-2I3O-7T-A1 is a latch-up detection solution that can support integration into advanced FinFET process nodes such as N7. The IP works in...
105
12.0
General Purpose Voltage Buffer
The ODT-OBF-ULP-DC-16FFCT is a voltage buffer with a high drive capability and is stable up to a 1nF output load. It can be used to daisy-chain volta...
106
12.0
Analog Front End: 16x 12-bit 200 MSPS ADCs, 14x Voltage DACs, 4x 250 MSPS DACs, 4x TVM, LDO
The ODT-AFE-8A1P-16FFCT is a highly integrated AFE designed in a 16nm CMOS process. The AFE includes eight 9-bit, 1GSPS ADCs, multiple LDOs and refer...
107
12.0
Analog Front End: 8x 12-bit 2 GSPSADCs, 4x 12-bit 200 MSPS ADCs, TVM, PLL, LDO
The ODT-AFE-12A1P2T-16FFCT is an ultra high-performance AFE designed in a 16nm CMOS process. The AFE includes eight 12-bit, 2GSPS ADCs, four 12-bit 2...
108
12.0
Low Dropout (LDO) Capless Regulator - GF 22FDX
The ODT-LDO-IC-250M-GF22FDX is a low dropout (LDO), linear regulator for integration in a SoC. The LDO uses advanced control techniques to achieve exc...
109
11.0
12-bit, 5 MSPS ADC with 8:1 Input Mux in 6nm CMOS
The ODT-ADS-12B5M-6 is an ultra low-power ADC designed in a 6nm process. This 12-bit, 5MSPS ADC supports input signals up to 1 MHz and features 1.8V s...
110
11.0
12bit, 400 MSPS ADC Ultra Low Power
The ODT-ADS-12B400M-7T is an ultra low power ADC designed in a 7nm CMOS process. This 12-bit, 400MSPS ADC supports input signals up to 200MHz and fea...
111
11.0
Wasiela - complete System and RTL design services
Wasiela provides complete System and RTL design services that Include: Digital Design and Verification Custom Communication System Design In...
112
10.0
6-bit, 1 GSPS High Performance DAC in 28nm CMOS
The ODT-DAC-6B1G-28 is a ultra-high performance current steering 6-bit 1 GSPS DAC in a standard 28nm CMOS process, implemented using Omni Design's gro...
113
10.0
12 bit, 500 MSPS ADC on GF 22FDX
The ODT-ADS-12B500M-G22FDX is an ultra-low power ADC designed in a 22nm CMOS process. This 12-bit, 500MSPS ADC supports input signals upo 100MHz an...
114
10.0
68000 - D68000-BDM - 16/32-bit Microprocessor with BDM
The D68000-BDM soft core is binary-compatible with the industry standard 68000 32-bit microcoprocessor. It has a 16-bit data bus and a 24-bit address ...
115
10.0
DesignWare Library contains the essential infrastructure IP for design and verification
The DesignWare Library contains the essential infrastructure IP for design and verification including datapath components, AMBA On-Chip Bus and microc...
116
10.0
UniIC Semiconductor - SoC design Services
UniIC Semiconductor SoC design services team possesses end-to-end development experience, from design specifications to chip mass production testing. ...
117
10.0
Mobiveil Inc.- Consulting and Design services
Customization Mobiveil’s IP Enabled services is a highly specialized services for its IP customers for customizing mobiveil IP for special applicat...
118
10.0
Low Dropout (LDO) Capless Regulator
The ODT-LDO-IC-250M-12 is a low dropout (LDO), linear regulator for integration in a SoC. The LDO uses advanced control techniques to achieve excellen...
119
10.0
Low Dropout (LDO) Capless Regulator
The ODT-LDO-IC-250M-16 is a low dropout (LDO), linear regulator for integration in a SoC. The LDO uses advanced control techniques to achieve excellen...
120
10.0
Low Dropout (LDO) Capless Regulator
The ODT-LDO-IC-250M-28HPCPT is a low dropout (LDO), linear regulator for integration in a SoC. The LDO uses advanced control techniques to achieve exc...
121
10.0
Low Dropout (LDO) Capless Regulator
The ODT-LDO-IC-60M-7T-122 is a low dropout (LDO), linear regulator for integration in a SoC. The LDO uses advanced control techniques to achieve excel...
122
10.0
Low Dropout (LDO) Capless Regulator
The ODT-LDO-IC-250M-5 is a low dropout (LDO), linear regulator for integration in a SoC. The LDO uses advanced control techniques to achieve excellent...
123
10.0
Low Dropout (LDO) Capless Regulator, 25mA output, GF 22FDX
The ODT-LDO-IC-25M-GF22FDX is a low dropout (LDO), linear regulator for integration in a SoC. The LDO uses advanced control techniques to achieve exce...
124
10.0
Pre-integrated IP blocks with an efficient processor and software in a single subsystem provides a configurable, SoC-ready solution that reduces design and integration effort
As more functionality is integrated into an SoC, it is costly and time consuming to develop and maintain necessary functional blocks that are complex,...
125
9.0
PVT - Process, Voltage, and Temperature Monitor
The ODT-PVT-ULP-001C-5 is an ultra-low power temperature, voltage and process monitor designed in a 5nm CMOS process. This IP operates over the entire...
126
8.0
6-bit, 1 GSPS High Performance AFE in 28nm CMOS
The ODT-ADS-6B1G-28 is a ultra-high performance current steering 6-bit 1 GSPS ADC in a standard 28nm CMOS process, implemented using Omni Design's gro...
127
8.0
32bit - D32PRO - Scalable & Royalty-Free 32-bit CPU
The D32PRO is a royalty free, silicon proven, high performance soft core of a single-chip 32-bit embedded controller, with Floating Point Coprocessor....
128
8.0
14-bit, 1200 MSPS Ultra Low Power AFE in 28nm CMOS
The ODT-AFE-14B1P2G-28 is a low power high speed pipelined AFE designed in a 28nm standard CMOS process. This 14-bit ADC features excellent dynamic pe...
129
8.0
Ultra-Low-Power Bandgap Voltage Reference in 28nm CMOS
The ODT-REF-28HPCPT-SV1P8 is a high-performance reference current and voltage generator. The block incorporates a proprietary architecture to achieve ...
130
8.0
Ultra-Low-Power Bandgap Voltage Reference in 40nm CMOS
The ODT-REF-40LP-SV1P8-ULP140N is an ultra-low power CMOS bandgap reference designed in a 40nm standard CMOS process without needing the use of any bi...
131
8.0
Ultra-Low-Power Bandgap Voltage Reference in 6nm CMOS
The ODT-REF-6T is a high-performance reference current and voltage generator. The block incorporates a proprietary architecture to achieve high power ...
132
8.0
Analog Front End: 1 channel of 12-bit 2 GSPS ADC IQ Pairs, 1 channel of 12-bit 2 GSPS DAC IQ Pairs, PVT & Integrated PLL
The ODT-AFE-1T1R-12 is an ultra-high-performance AFE designed in a 12nm process. The AFE includes 1 IQ Pairs of Tx and Rx for either the FR1 or FR2 ba...
133
8.0
Analog Front End: 4 channels of 12-bit 2 GSPS ADC IQ Pairs, 4 channels of 12-bit 2 GSPS DAC IQ Pairs, PVT & Integrated PLL
The ODT-AFE-4T4R-12 is an ultra-high-performance AFE designed in a 12nm process. The AFE includes 2 IQ Pairs of Tx and Rx for the FR2 band, and combin...
134
8.0
Analog Front End: 8x 9-bit, 1 GSPS ADCs, PLL
The ODT-AFE-16A18D4T-16FFCT is a highly integrated AFE designed in a 16nm CMOS process. The AFE includes sixteen 12-bit, 200MSPS ADCs, eight voltage ...
135
8.0
FSPI - DFSPI - SPI FLASH Controller with Execute in place – XIP (SINGLE, DUAL and QUAD SPI Bus Controller with DDR / DTR support and optional AES Encryption)
The DFSPI is a fully configurable SINGLE, DUAL, QUAD and OCTAL SPI master/slave device, which allows user to configure polarity and phase of serial cl...
136
8.0
OSPI - DOSPI - Serial Peripheral Interface - Master/Slave with single, dual, quad and octal SPI Bus support
The DOSPI is a revolutionary octal SPI designed to offer the fastest operations available for any serial SPI memory. It is flexible enough to interfac...
137
8.0
TVM - Temperature/Voltage Monitor in GF 22FDX
The ODT-TVM-ULP-001C-GF22FDX is an ultra-low power temperature and voltage monitor designed in a 22nm process. This IP operates over the entire temper...
138
7.5
I2C Master/Slave Controller (Exclusively for Turnkey ASIC design; not for standalone licensing)
I2C slave enables communication with an I2C master using the standard I2C protocol. It is designed for easy integration into SoC, such as sensors or m...
139
7.5
SARADC12 (Exclusively for Turnkey ASIC design; not for standalone licensing)
This is a 12-bit SAR ADC. This operates at 2 MSPS and supports 8-channels. It can measure 8 analog inputs simultaneously and converts them to digital....
140
7.5
UART/Serial Port (Exclusively for Turnkey ASIC design; not for standalone licensing)
The Serial Port IP (RS232, RS422, RS485) is a Single Port Standalone IP, which supports all the features in the modes like 16C450, 16C550, 16C550Ex, 1...
141
7.5
LCD Panel Controller IP (Exclusively for Turnkey ASIC design; not for standalone licensing)
This is an LCD Panel Controller IP that can drives multiple LCD panels available in the market. It is configurable to support 1/3-bias, 1/2 bias LCDs....
142
7.5
SDARC24 (Exclusively for Turnkey ASIC design; not for standalone licensing)
This is a 24-bit Sigma Delta ADC IP. This can take input signals < 10 kHz and converts them to digital form....
143
7.5
IEEE1284 Parallel Port Controller (Exclusively for Turnkey ASIC design; not for standalone licensing)
The IEEE1284 compliant parallel port controller supports faster data rates up to 2.0Mbytes/sec. It supports Nibble mode, Byte Mode, EPP, and ECP. Auto...
144
7.5
Temperature Sensor IP (Exclusively for Turnkey ASIC design; not for standalone licensing)
This is a Temperature Sensor IP. It measures temperature variations within the IC and converts them in to digital form. The processor in the system ca...
145
7.5
Generic GPIO Controller (Exclusively for Turnkey ASIC design; not for standalone licensing)
General Purpose I/O pins are used for system control and connection of various devices. This (GPIO) controller provides dedicated general-purpose pins...
146
7.5
Clock Management IP (Exclusively for Turnkey ASIC design; not for standalone licensing)
This is a Clock Management IP that can drive 3 different output clocks. These 3 different clocks are required for any simple Digital or Mixed Signal A...
147
7.5
Power Management IP (Exclusively for Turnkey ASIC design; not for standalone licensing)
This is a Power Management IP that can take 3 different input supplies and can drive 4 different output power domains. These 4 different power domains...
148
7.5
SPI Master/Slave Controller (Exclusively for Turnkey ASIC design; not for standalone licensing)
SPI Controller IP enables synchronous serial communication with slave or master peripherals. It has Generic interface which programs the control and d...
149
7.5
IrDA Controller (Exclusively for Turnkey ASIC design; not for standalone licensing)
The IRDA controller supports data rates from 2.4 Kbps to 115.2Kbps in SIR mode, 1.152 Mbps in MIR (Medium IR), and 4Mbps in FIR mode...
150
7.5
USB 2.0 Device controller (Exclusively for Turnkey ASIC design; not for standalone licensing)
USB 2.0 Device controller implements a complete high/full speed peripheral controller that interfaces UTMI USB port transceiver on one side and to an ...