LIN Controller IP Core, equipped with a Safety package (Safe LIN, ISO 26262: Safety manual, FMEDA), tailored specifically for High-End Automotive and Consumer Applications is available for immediate licensing
18th Sept 2023. – T2MIP, the global independent semiconductor IP Cores provider and technology experts, is delighted to announce the instant availability of its partner’s Production proven LIN Controller IP Core. This IP core solution is available with ASIL B, ASIL C, and ASIL D automotive safety packages.
An interface between a microprocessor/microcontroller and a LIN bus is provided by the LIN core. Depending on the work mode selected by the microprocessor/microcontroller. It is possible to send and receive LIN messages compatible with LIN 1.3, LIN 2.1, and LIN 2.2A using a LIN controller with UART half-duplex improved capabilities that offer transmission speeds between 1kb/s and 20kb/s. The reported information status encompasses both the nature and state of transfer operations executed by the LIN, along with an extensive array of LIN error conditions, which encompass overrun, framing, parity, and timeout issues.
LIN bridge to APB, AHB, and AXI bus, it is a softcore of the Local Interconnect Network. The mentioned information status comprises a wide range of LIN error circumstances (overrun, framing, parity, and timeout), as well as the kind and state of transfer operations carried out by the LIN. A customizable timer included in our Core enables the detection of synchronization and timeout problems. The RTL-level description of the LIN enables its intended application in FPGA and ASIC technologies.
This advanced solution has been crafted in compliance with ISO26262-10 Safety Element. Optionally, it can be further enhanced with essential safety mechanisms and offers comprehensive safety documentation. This documentation encompasses all the ISO26262 soft IP SEooC mandated work products, including a thorough Failure Modes Effects and Detection Analysis (FMEDA) analysis. The documentation also provides step-by-step instructions to facilitate the seamless integration of the IP into the customer's system and to facilitate system-level safety analysis. Importantly, all safety-related work products have undergone rigorous scrutiny via third-party, independent audits for added assurance.
These IP Cores are straight forward to utilize, thanks to simple licensing procedures that do not need royalty-per-chip payments. There are two formats of the delivered IP core where you can choose either VHDL or Verilog RTL synthesizable source code (HDL Source Code) or FPGA EDIF/NGO/NGD/QXP/VQM (Netlist).
Availability:
These Semiconductor Peripheral Interface IP Cores are available for instant licensing stand-alone and multiple IPs can be provided as a bundle package. For more information on licensing options and pricing please drop a request / MailTo
About T2M:
T2MIP is the global independent semiconductor technology experts, supplying complex semiconductor IP Cores, Software, KGD and disruptive technologies enabling accelerated development of your Storage, Automotive, Modem Interface, Low Power Applications, Industrial and Communication System. For more information, please visit: www.t-2-m.com
|
T2M Hot IP
- Bluetooth Dual Mode v5.4 / IEEE 15.4 PHY/RF IP in TSMC22nm ULP
- GNSS Ultra low power (GPS, Galileo, GLONASS, Beidou3, QZSS, IRNSS, SBAS) Digital ...
- USB 3.0/ PCIe 2.0/ SATA 3.0 Combo PHY IP, Silicon Proven in TSMC 28HPC+
- DVB-S2X WideBand Demodulator & Decoder IP (Silicon Proven)
- MIPI D-PHY Tx IP, Silicon Proven in TSMC 22ULP
Related News
- Production-proven CAN Controller IP Core, equipped with a Safety package (Safe DCAN-FD, ISO 26262: Safety manual, FMEDA), tailored specifically for High-End Automotive and Consumer Applications is available for immediate licensing
- CAN 2.0 and LIN 2.2 Controller IP Cores with ASIL B, C and D packages for High-End Automotive and Consumer Applications
- MIPI D-PHY Tx IP Core in 22nm along with MIPI DSI-2 Tx Controller IP Core for your High-End Camera and Display needs is available for immediate licensing
- M31 MIPI M-PHY is certified with ASIL-B safety level of ISO 26262 to provide safe and reliable automotive SoC design
- JESD204B & JESD204C Tx-Rx PHY & Controller IP Cores in 28nm are available for immediate licensing with Proven Automotive Compatibility
Breaking News
- Thalia's AMALIA 24.2 introduces pioneering estimated parasitics feature to reduce PEX iterations by at least 30%
- TSMC plans 1.6nm process for 2026
- Qualitas Semiconductor Partners with TUV Rheinland Korea to Enhance ISO 26262 Functional Safety Management System
- M31 has successfully launched MIPI C/D PHY Combo IP on the advanced TSMC 5nm process
- Ceva multi-protocol wireless IP could simplify IoT MCU and SoC development
Most Popular
- Controversial former Arm China CEO founds RISC-V chip startup
- Siemens collaborates with TSMC on design tool certifications for the foundry's newest processes and other enablement milestones
- Credo at TSMC 2024 North America Technology Symposium
- Synopsys Accelerates Next-Level Chip Innovation on TSMC Advanced Processes
- Kalray Joins Arm Total Design, Extending Collaboration with Arm on Accelerated AI Processing
E-mail This Article | Printer-Friendly Page |