CAN to TSN Gateway from CAST Bridges CAN 2.0/FD Buses with Time Sensitive Ethernet
IP core provides easy integration of up to seven CAN buses with an Ethernet network in automotive and industrial systems; will be shown at TSN/A Conference
Woodcliff Lake, NJ — October 4, 2019 — Semiconductor intellectual property (IP) provider CAST, Inc. today announced the availability of a CAN to TSN Ethernet IP core that gives automotive and industrial system designers an easy and cost-effective way to link CAN 2.0 and FD buses or devices with a Time Sensitive Ethernet network.
The company believes the CAN2TSN is among the first—and perhaps the only—available silicon IP solution for the growing challenge of integrating conventional and new networks in evolving, data-driven automotive and industrial systems. Developed by CAST using CAST IP and CAN and TSN cores sourced from partner Fraunhofer IPMS (www.ipms.fraunhofer.de), the new CAN2TSN CAN-to-TSN Ethernet Gateway/Bridge provides:
- Bridging of up to seven independent CAN 2.0 or CAN FD ports to a single TSN Ethernet port;
- High-accuracy TSN timing synchronization (IEEE 802.1AS) of under 5µs and flexible TSN traffic shaping (IEEE 802.1Qav and IEEE 802.1Qbv);
- Low-latency CAN to TSN routing of under 30µs for both directions;
- Easy integration, with industry-standard interfaces to the system, Ethernet PHY, and CAN transceivers; and
- Fast, efficient operation, with custom hardware stacks running most protocols.
The CAN2TSN Gateway IP core is shipping now. A complete CAN2TSN reference design board is also available; CAST will be demonstrating it with Fraunhofer IPMS in their booth at the TSN/A Conference in Bad Homburg, Germany, October 8–9, 2019.
The CAN2TSN CAN-to-TSN Ethernet Gateway/Bridge is part of CAST’s Automotive Interfaces IP suite, which also includes CAN, TSN, SENT, and LIN IP cores. Learn more about this and CAST’s complete line of IP by visiting www.cast-inc.com, emailing info@cast-inc.com, or calling +1 202.891.8300.
|
CAST, Inc. Hot IP
Related News
- CAST CAN 2.0/FD Bus IP is Safety-Ready with ISO 26262 Certification
- CAST And Avery Design Systems Expand IP Partnership to Support Next Generation High-Bandwidth Automotive Networking And Control Systems
- Avery, CAST, and Rianta Roll Together on Automotive Ethernet and CAN FD IP and VIP Solutions
- CAST adds 1-Gigabit Ethernet MAC and USB 2.0 IP Cores
- USB 4.0, MIPI DSI/CSI 2.0, Display Port 1.4, HDMI 2.1, DDR5, PCIe5.0, 1G Ethernet IP Cores and many more Wired Interface IP Cores available for immediate licensing
Breaking News
- Ceva multi-protocol wireless IP could simplify IoT MCU and SoC development
- Controversial former Arm China CEO founds RISC-V chip startup
- Fundamental Inventions Enable the Best PPA and Most Portable eFPGA/DSP/SDR/AI IP for Adaptable SoCs
- Cadence and TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
- Numem at the Design & Reuse IP SoC Silicon Valley 2024
Most Popular
- GUC provides 3DIC ASIC total service package to AI/HPC/Networking customers
- Qualitas Semiconductor Appoints HSRP as its Distributor for the China Markets
- Siemens collaborates with TSMC on design tool certifications for the foundry's newest processes and other enablement milestones
- Credo at TSMC 2024 North America Technology Symposium
- Huawei Mate 60 Pro processor made on SMIC 7nm N+2 process
E-mail This Article | Printer-Friendly Page |