Design & Reuse
Catalog of SIP Cores
System on Chip design resources
arrow Arithmetic & Mathematic (45)
arrow Embedded Memories (993)
arrow I/O Library (1031)
arrow Standard cell (756)
2825 IP
301
2.0
3.3V Wide-Range General Purpose Inline I/O Pad Set
The 3.3V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of power cells along with corner and spa...
302
2.0
3.3V Wide-Range General Purpose Staggered I/O Pad Set
The 3.3V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of I/O power, core power, and analog power...
303
2.0
3.3V Wide-Range General Purpose Staggered I/O Pad Set
The 3.3V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of power cells along with corner and spa...
304
2.0
3.3V Wide-Range General Purpose Staggered I/O Pad Set
The 3.3V GPIO library provides general purpose bidirectional I/O cells. These programmable, multi-voltage I/O’s give the system designer the flexibili...
305
2.0
2.5V 100MHz Oscillator Staggered I/O Pad Set
The OSx_BI_032_12V oscillator is designed to generate an asynchronous on-chip clock signal with an appropriate external oscillator crystal. The design...
306
2.0
2.5V Wide-Range General Purpose I/O Pad Set
The 2.5V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of power cells along with corner and spa...
307
2.0
2.5V Wide-Range General Purpose I/O Pad Set
The 2.5V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of I/O power, core power, and analog power...
308
2.0
1.8V Fault Tolerant General Purpose I/O Inline Pad Set
The 1.8V GPIO FT library provides ultra low leakage general purpose bidirectional I/O cells. These programmable, multi-voltage I/O’s give the system d...
309
2.0
1.8V Fault Tolerant General Purpose I/O Staggered Pad Set
The 1.8V GPIO FT library provides ultra low leakage general purpose bidirectional I/O cells. These programmable, multi-voltage I/O’s give the system d...
310
2.0
1.8V General Purpose I/O Staggered Pad Set
The 1.8V GPIO FT library provides ultra low leakage general purpose bidirectional I/O cells. These programmable, multi-voltage I/O’s give the system d...
311
2.0
1.8V General Purpose I/O Staggered Pad Set
The 1.8V GPIO FT library provides ultra low leakage general purpose bidirectional I/O cells. These programmable, multi-voltage I/O’s give the system d...
312
2.0
1.8V 3.3V Tolerant General Purpose IO
The 1.8V GPIO 3VT library provides general purpose bidirectional I/O cells that are both fault tolerant and 3.3V tolerant. These programmable, multi-v...
313
2.0
1.8V General Purpose I/O Inline Pad Set
The 1.8V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of power cells along with corner and spa...
314
2.0
1.8V General Purpose I/O Inline Pad Set
The 1.8V GPIO library provides general purpose bidirectional I/O cells. These programmable, multi-voltage I/O’s give the system designer the flexibili...
315
2.0
1.8V General Purpose I/O Pad Set
The 1.8V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of I/O power, core power, and analog power...
316
2.0
1.8V General Purpose I/O Pad Set
The 1.8V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of power cells along with corner and spa...
317
2.0
1.8V General Purpose I/O Staggered Pad Set
The 1.8V General Purpose I/O library provides bidirectional I/O, isolated analog I/O, and a full complement of power cells along with corner and spa...
318
2.0
1.8V General Purpose Inline I/O Pad Set
The 1.8V GPIO library provides general purpose bidirectional I/O cells. These programmable, multi-voltage I/O’s give the system designer the flexibili...
319
2.0
1.8V General Purpose Staggered I/O Pad Set
The 1.8V GPIO library provides general purpose bidirectional I/O cells. These programmable, multi-voltage I/O’s give the system designer the flexibili...
320
2.0
1.8V GPIO: 3.3V Tolerant
The 1.8V Fault-Tolerant General Purpose I/O library provides a 3.3V tolerant programmable, bidirectional I/O that give the system designer the flexibi...
321
2.0
1.8V Power Support I/O Pad Set
The 1.8V Support: Power library provides a full complement of cells to support the assembly of a complete pad ring by abutment. It is supplied as a st...
322
2.0
1.8V Programmable 100MHz Oscillator I/O Pad Set
The Oscillators library provides a programmable oscillator for on-chip asynchronous clock generation with an appropriate external crystal. This oscil...
323
2.0
1.8V Programmable 100MHz Oscillator I/O Pad Set
The Oscillators library provides a programmable oscillator for on-chip asynchronous clock generation with an appropriate external crystal. This oscil...
324
2.0
1.8V Programmable 100MHz Oscillator I/O Pad Set
The Oscillators library provides oscillators for on-chip asynchronous clock generation with an appropriate external crystal. This library is offered ...
325
2.0
10 track thick oxide standard cell library at TSMC 55 - low leakage and direct battery connection (operating voltages from 1.08 V to 3.63 V)
TSMC 55 LPeF, SESAME BIV, a new thick oxyde based standard cell library for ultra low leakage logic design and/or direct battery connection through th...
326
2.0
028TSMC_LVDS_01 - Up to 3.125 Gbps LVDS IPs library
028TSMC_LVDS_01 is a library including: • Transmitter LVDS drivers (LVDS_TX_V(H)) up to 2Gbps; • Receiver LVDS drivers (LVDS_RX_V(H)) up to 2Gbps; ...
327
2.0
I2C I/O Pad Set
The I2C libraries provide the bidirectional I/O for two-line serial communication per Rev. 4 of the I2Cbus industry specification. The design is compa...
328
2.0
I2C I/O Pad Set
The I2C library provides open-drain bi-directional I/O cells designed for the I2C two-line interface. It is compliant with the I2C-bus specification –...
329
2.0
I2C I/O Pad Set
The I2C libraries provide the bidirectional I/O for two-line serial communication per Rev. 4 of the I2Cbus industry specification. The design is compa...
330
2.0
I2C IO Pad Set
The I2C library provides open-drain bi-directional I/O cells designed for the I2C two-line interface. It is compliant with the I2C-bus specification –...
331
2.0
I2C IO Pad Set
The I2C library provides the bidirectional I/O for two-line serial communication per Rev. 4 of the I2C-bus industry specification. The design is comp...
332
2.0
I2C IO Pad Set
...
333
2.0
I3C I/O Library
The I3C library provides a bi-directional I/O driver designed for the I3C two-line interface. It is compliant with the MIPI Specification for I3C –Ver...
334
2.0
ICC I/O Pad Set
The ICC library provides the bidirectional reset, clock, and data I/O drivers for the smart card UICC terminal interface. This library has been desi...
335
2.0
PCI IO Pad Set
The PCI 3.0 library provides the driver / receiver and required support cells for PCI 3.0 signaling. The cells are compliant with the PCI Local Bus S...
336
2.0
SD 3.0 I/O Pad Set
The SD library provides the driver / receiver cell for SD 3.0 signaling. The library is compliant with the SD Specifications, Part 1, Physical Layer S...
337
2.0
SD 3.0 I/O Pad Set
The SD library provides the driver / receiver cell and required support cells for SD 3.0 signaling. Fault-tolerant operation. This library is offere...
338
2.0
DDR3 / DDR4 Combo I/O Pad Set
The DDR3 / DDR4 library includes the combo driver/receiver cells with embedded power cells, the driver impedance calibration cell, and a full compleme...
339
2.0
DDR3_DDR4 IO Pad Set
The DDR3 / DDR4 library includes the combo driver/receiver cells with embedded power cells, the driver impedance calibration cell, and a full compleme...
340
2.0
General-Purpose I/O (GPIO) - 1.5V-1.8V
The 1.8V General Purpose I/O libraries provide bidirectional I/O, isolated analog I/O, and a full complement of I/O power, core power, and analog powe...
341
2.0
General-Purpose I/O (GPIO) - 1.5V-1.8V
The 1.8V General Purpose I/O libraries provide bidirectional I/O, isolated analog I/O, and a full complement of I/O power, core power, and analog powe...
342
2.0
RF I/O Pad Set and Discrete RF ESD Protection Components
The RF libraries include analog signal pads and ESD protection components for RF applications. These libraries are offered as a supplement to the stan...
343
2.0
RF I/O Pad Set and Discrete RF ESD Protection Components
The RF library include analog signal pads and ESD protection components for RF applications. This library is offered as a supplement to the IO librar...
344
2.0
RGMII / GMII Combo I/O Pad Set
The (R)GMII libraries provide the combo driver / receiver and required support cells for (R)GMII signaling. The libraries are compliant with the Gigab...
345
2.0
RGMII IO Pad Set
The (R)GMII libraries provide the combo driver / receiver and required support cells for (R)GMII signaling. The libraries are compliant with the Giga...
346
2.0
RGMII IO Pad Set
The (R)GMII library provides the combo driver / receiver and required support cells for (R)GMII signaling. The libraries are compliant with the Gigabi...
347
2.0
RGMII IO Pad Set
The (R)GMII / SMII Combo library provides the driver / receiver cell for GMII, RGMII, and SMII signaling along with a full complement of I/O power, co...
348
2.0
CI Plus
The CI Plus library provides a programmable bi-directional I/O cell designed to meet the signal interface requirements of the Common Interface. This l...
349
2.0
High-Speed LVDS (SERDES) Transceiver
High-speed LVDS (SERDES) transceiver with up to 8 serial data lanes, generic data width and integrated asynchronous FIFO. Ideal for standard LVDS link...
350
2.0
Digital Cell Library
The agileDSCL is a compact digital standard cell library customizable for specific foundries and processes, and optimized for low-power, ultra-low-lea...