Design & Reuse
97 IP
1
50.0
TSMC 3nm (N3E) 1.2V LVDS Tx/Rx with 1.8V BGR
Synopsys Low Voltage Differential Signaling (LVDS) I/O library is a high-frequency interface that uses differential signals for data transmission. A f...
2
50.0
TSMC 3nm (N3E) 1.2V/1.8V GPIO Libraries
Synopsys’ General-Purpose I/O (GPIO) Library IP provides designers with the input/output operation, functionality, and reliability required for their ...
3
50.0
TSMC 3nm (N3E) 1.2V/1.8V GPIO with 1.8V Failsafe Libraries
Synopsys’ General-Purpose I/O (GPIO) Library IP provides designers with the input/output operation, functionality, and reliability required for their ...
4
50.0
TSMC 3nm (N3E) 1.2V/1.8V GPIO with 1.8V Failsafe Libraries, multiple metalstacks
Synopsys’ General-Purpose I/O (GPIO) Library IP provides designers with the input/output operation, functionality, and reliability required for their ...
5
50.0
TSMC 3nm (N3E) 1.2V/1.8V I3C Libraries
Synopsys I3C I/O library supports a simplified system of connecting and managing multiple sensors in a device. Multiple sensor secondary devices can b...
6
50.0
TSMC 3nm (N3E) 1.2V/1.8V I3C Libraries, multiple metalstacks
Synopsys I3C I/O library supports a simplified system of connecting and managing multiple sensors in a device. Multiple sensor secondary devices can b...
7
50.0
TSMC 3nm (N3E) 1.5V LVDS
Synopsys Low Voltage Differential Signaling (LVDS) I/O library is a high-frequency interface that uses differential signals for data transmission. A f...
8
50.0
TSMC 3nm (N3E) 1.8V SD/eMMC IO
Synopsys SD/eMMC PHY provides an optimal balance for cost and performance for storage solutions. Synopsys SD/eMMC PHY is a hard IP that can be used to...
9
50.0
TSMC 3nm (N3E) 1.8V SD/eMMC PHY
Synopsys SD/eMMC PHY provides an optimal balance for cost and performance for storage solutions. Synopsys SD/eMMC PHY is a hard IP that can be used to...
10
50.0
TSMC 3nm (N3E) 1.8V SD/eMMC PHY, multiple metalstacks
Synopsys SD/eMMC PHY provides an optimal balance for cost and performance for storage solutions. Synopsys SD/eMMC PHY is a hard IP that can be used to...
11
50.0
TSMC 3nm (N3E) GPIO Basekit Libraries
Synopsys’ General-Purpose I/O (GPIO) Library IP provides designers with the input/output operation, functionality, and reliability required for their ...
12
29.0
USB V3.1 Power Delivery Type-C Port Evaluation board for OTI9108 IP
The OTS9106 board is a complete FPGA and ARM processor based USB PD Type-C port, featuring the RTL and C source code of the Obsidian Technology OTI910...
13
20.0
1.8V/3.3V I2C in GF (12nm)
Synopsys Inter-Integrated Circuit (I2C) I/O library is used for two wire interfaces to connect low-speed devices like EEPROM, A/D, and D/A converters ...
14
20.0
IO 1.2V GPIO in Samsung (4nm)
Synopsys’ General-Purpose I/O (GPIO) Library IP provides designers with the input/output operation, functionality, and reliability required for their ...
15
20.0
IO 1.8V GPIO in Samsung (4nm)
Synopsys’ General-Purpose I/O (GPIO) Library IP provides designers with the input/output operation, functionality, and reliability required for their ...
16
20.0
IO 1.8V LVDS in GF (22nm)
Synopsys Low Voltage Differential Signaling (LVDS) I/O library is a high-frequency interface that uses differential signals for data transmission. A f...
17
20.0
IO 1.8V LVDS Rx in GF (12nm)
Synopsys Low Voltage Differential Signaling (LVDS) I/O library is a high-frequency interface that uses differential signals for data transmission. A f...
18
20.0
IO 3.3V eMMC in GF (22nm)
Synopsys SD/eMMC PHY provides an optimal balance for cost and performance for storage solutions. Synopsys SD/eMMC PHY is a hard IP that can be used to...
19
20.0
IO 3.3V LVDS Rx in GF (12nm)
Synopsys Low Voltage Differential Signaling (LVDS) I/O library is a high-frequency interface that uses differential signals for data transmission. A f...
20
20.0
IO I2C 3.3V in GF (22nm)
Synopsys Inter-Integrated Circuit (I2C) I/O library is used for two wire interfaces to connect low-speed devices like EEPROM, A/D, and D/A converters ...
21
20.0
IO I3C 3.3V in GF (22nm)
Synopsys I3C I/O library supports a simplified system of connecting and managing multiple sensors in a device. Multiple sensor secondary devices can b...
22
20.0
TSMC 4nm (N4P) 1.2V/1.8V Basekit Libraries
Synopsys provides system-on-chip (SoC) designers with an extensive offering of high-quality, foundation IP, including memory compilers, logic librarie...
23
20.0
TSMC 4nm (N4P) 1.2V/1.8V Basekit Libraries, multiple metalstacks
Synopsys provides system-on-chip (SoC) designers with an extensive offering of high-quality, foundation IP, including memory compilers, logic librarie...
24
20.0
TSMC 4nm (N4P) 1.2V/1.8V I3C Libraries
Synopsys I3C I/O library supports a simplified system of connecting and managing multiple sensors in a device. Multiple sensor secondary devices can b...
25
20.0
TSMC 4nm (N4P) 1.2V/1.8V/2.5V Failsafe GPIO Libraries
Synopsys’ General-Purpose I/O (GPIO) Library IP provides designers with the input/output operation, functionality, and reliability required for their ...
26
20.0
TSMC 4nm (N4P) 1.8V SD/eMMC IO
Synopsys SD/eMMC PHY provides an optimal balance for cost and performance for storage solutions. Synopsys SD/eMMC PHY is a hard IP that can be used to...
27
20.0
TSMC 4nm (N4P) 1.8V SD/eMMC PHY
Synopsys SD/eMMC PHY provides an optimal balance for cost and performance for storage solutions. Synopsys SD/eMMC PHY is a hard IP that can be used to...
28
20.0
TSMC 4nm (N4P) 2.5V Basekit Libraries
Synopsys provides system-on-chip (SoC) designers with an extensive offering of high-quality, foundation IP, including memory compilers, logic librarie...
29
20.0
TSMC 4nm (N4P) 2.5V Basekit Libraries, multiple metalstacks
Synopsys provides system-on-chip (SoC) designers with an extensive offering of high-quality, foundation IP, including memory compilers, logic librarie...
30
20.0
TSMC 5nm (N5) 1.2V/1.8V Basekit Libraries
Synopsys’ General-Purpose I/O (GPIO) Library IP provides designers with the input/output operation, functionality, and reliability required for their ...
31
20.0
TSMC 5nm (N5) 1.2V/1.8V Failsafe GPIO Libraries
Synopsys’ General-Purpose I/O (GPIO) Library IP provides designers with the input/output operation, functionality, and reliability required for their ...
32
20.0
TSMC 5nm (N5) 1.2V/1.8V Failsafe GPIO Libraries, multiple metalstacks
Synopsys’ General-Purpose I/O (GPIO) Library IP provides designers with the input/output operation, functionality, and reliability required for their ...
33
20.0
TSMC 5nm (N5) 1.2V/1.8V I3C Libraries
Synopsys I3C I/O library supports a simplified system of connecting and managing multiple sensors in a device. Multiple sensor secondary devices can b...
34
20.0
TSMC 5nm (N5) 1.2V/1.8V/2.5V Failsafe GPIO Libraries
Synopsys’ General-Purpose I/O (GPIO) Library IP provides designers with the input/output operation, functionality, and reliability required for their ...
35
20.0
TSMC 5nm (N5) 1.2V/1.8V/2.5V GPIO Libraries
Synopsys’ General-Purpose I/O (GPIO) Library IP provides designers with the input/output operation, functionality, and reliability required for their ...
36
20.0
TSMC 5nm (N5) 1.2V/1.8V/2.5V GPIO Libraries, multiple metalstacks
Synopsys’ General-Purpose I/O (GPIO) Library IP provides designers with the input/output operation, functionality, and reliability required for their ...
37
20.0
TSMC 5nm (N5) 1.8V SD/eMMC IO
Synopsys SD/eMMC PHY provides an optimal balance for cost and performance for storage solutions. Synopsys SD/eMMC PHY is a hard IP that can be used to...
38
20.0
TSMC 5nm (N5) 1.8V SD/eMMC PHY
Synopsys SD/eMMC PHY provides an optimal balance for cost and performance for storage solutions. Synopsys SD/eMMC PHY is a hard IP that can be used to...
39
20.0
TSMC 5nm (N5) 2.5V Basekit Libraries
Synopsys I3C I/O library supports a simplified system of connecting and managing multiple sensors in a device. Multiple sensor secondary devices can b...
40
20.0
TSMC 5nm (N5)1.8V SD/eMMC PHY, multiple metalstacks
Synopsys SD/eMMC PHY provides an optimal balance for cost and performance for storage solutions. Synopsys SD/eMMC PHY is a hard IP that can be used to...
41
20.0
TSMC 6nm (6FF) 3.3V GPIO
Synopsys’ General-Purpose I/O (GPIO) Library IP provides designers with the input/output operation, functionality, and reliability required for their ...
42
20.0
TSMC 6nm (6FF) 3.3V SMBUS (I2C) IO
Synopsys Inter-Integrated Circuit (I2C) I/O library is used for two wire interfaces to connect low-speed devices like EEPROM, A/D, and D/A converters ...
43
20.0
TSMC 6nm (N6) 3.3V Basekit Libraries
Synopsys provides system-on-chip (SoC) designers with an extensive offering of high-quality, foundation IP, including memory compilers, logic librarie...
44
20.0
TSMC 7nm (7FF) 1.8V LVDS
Synopsys Low Voltage Differential Signaling (LVDS) I/O library is a high-frequency interface that uses differential signals for data transmission. A f...
45
20.0
TSMC 7nm (7FF) 3.3V GPIO
Synopsys’ General-Purpose I/O (GPIO) Library IP provides designers with the input/output operation, functionality, and reliability required for their ...
46
11.0
I2S/Left-Justified/TDM Digital Audio Interface
The AR38U12 is a soft macro IP supporting industry-standard I2S, Left-Justified and Time-Division-Multiplexed (TDM) serial interface to parallel PCM (...
47
10.0
I2C & SMBus Controller
The I2C-SMBUS core implements a serial interface controller for the Inter-Integrated Circuit (I2C) bus and the System Management Bus (SMBus). The cor...
48
10.0
I2C and SPI Master/Slave Controller
The I2CSPI-CTRL is a compact and versatile serial interface controller supporting both SPI (Serial Peripheral Interface) and I2C (Inter-Integrated Cir...
49
9.0
3.3V general purpose I/O for 28nm CMOS
The 3.3V capable GPIO is an IP macro for on-chip integration. It is a 3.3V general purpose I/O built with a stack of 1.8V thick oxide MOS devices. It ...
50
9.0
I2C Controller
I²C (Inter-Integrated Circuit) Controller is a two-wire, bi-directional serial bus that provides simple and efficient method of data transmission over...