Design & Reuse
1971 IP
651
2.0
ONFI_3 IO Pad Set
The ONFI 3.0 library provides the combo driver / receiver cells, the ODT / driver impedance calibration cell, and the voltage reference cell to suppor...
652
2.0
ONFI_4 IO Pad Set
The ONFI 4.0 library provides the combo driver / receiver cells, the ODT / driver impedance calibration cell, and the voltage reference cell to suppor...
653
2.0
ONFI_4 IO Pad Set
The ONFI 4.1 library provides the combo driver / receiver cells, the ODT / driver impedance calibration cell, and the voltage reference cell to suppor...
654
2.0
LPDDR2 / LPDDR3 / DDR3 / DDR3L / DDR3U / DDR4 Combo I/O Pad Set
The LPDDR2/3_DDR3/4 library includes the combo driver/receiver cells with embedded power cells, the driver impedance calibration cell, and a full comp...
655
2.0
LPDDR2 / LPDDR3 / DDR3 / DDR3L / DDR3U / DDR4 Combo I/O Pad Set
The LPDDR2/3_DDR3/4 library includes the combo driver/receiver cells with embedded power cells, the driver impedance calibration cell, and a full comp...
656
2.0
ARINC 429 Synchronous Transmitter Receiver
The M429T1R1 macro implements a synchronous single-chip ARINC 429 Transmit and Receive Controller Macro capable of linking one CPU to one ARINC 429 bu...
657
2.0
USB 2.0 OTG ESD Protection I/O Pad Set
The USB 2.0 OTG ESD Protection library provides a comprehensive ESD solution for USB 2.0 hard macro cells....
658
2.0
ESD Protection
The ESD Protection library provides ESD protection components. In addition to core-placeable ESD protection cells, discrete components (RF diodes and ...
659
2.0
HSTL I/O Pad Set
The HSTL library includes the driver / receiver cells and a full complement of power and support cells for both single-ended and differential signalin...
660
2.0
SSTL_ I/O Pad Set
The SSTL_2 pad set is a full complement of I/O, power, and spacer cells (total of 14 cells) that are necessary to assemble a padring by abutment. Sinc...
661
2.0
SSTL_15 / SSTL_18 Combo I/O Pad Set
The SSTL_15 / SSTL_18 library supports bidirectional single-ended and differential SSTL_15 and SSTL_18 signaling. The driver/receiver pairs, with emb...
662
2.0
SSTL_15 / SSTL_18 Combo I/O Pad Set
The SSTL_15_18 combo pad set supports bidirectional single-ended and differential SSTL_15 and SSTL_18 signaling. The driver/receiver pairs, with embe...
663
2.0
SSTL_15 IO Pad Set
The SSTL_15 pad set supports bidirectional single-ended and differential SSTL_15 signaling. The driver/receiver pairs, with embedded power cells, ar...
664
2.0
SSTL_15 IO Pad Set
The SSTL_15 library supports bidirectional single-ended and differential SSTL_15 signaling. The driver/receiver pairs, with embedded power cells, are...
665
2.0
subLVDS I/O Pad Set
The subLVDS library provides a subLVDS driver, receiver, and temperature stable voltage reference capable of supporting 16 drivers operating at data...
666
2.0
subLVDS IO Pad Set
The subLVDS library provides an subLVDS driver, receiver, and temperature stable voltage reference capable of supporting 16 drivers operating at data ...
667
2.0
subLVDS IO Pad Set
The subLVDS library provides an subLVDS driver, receiver, and temperature stable voltage reference capable of supporting 16 drivers operating at data ...
668
2.0
5V Programmable GPIO
The 5V General Purpose I/O libraries provide bidirectional I/O, analog I/O, and a full complement of I/O power, core power, and analog power cells alo...
669
2.0
LVDS I/O Pad Set
The LVDS library provides an LVDS driver, receiver, and temperature stable voltage reference capable of supporting 16 drivers operating at data rates ...
670
2.0
LVDS I/O Pad Set
The LVDS library provides an LVDS driver, receiver, and temperature stable voltage reference capable of supporting 16 drivers operating at data rate...
671
2.0
LVDS I/O Pad Set
The LVDS library provides an LVDS driver, receiver, and temperature stable voltage reference capable of supporting 16 drivers operating at data rates ...
672
2.0
LVDS I/O Pad Set
The LVDS library provides an LVDS driver, receiver, and temperature stable voltage reference capable of supporting 16 drivers operating at data rate...
673
2.0
LVDS I/O Pad Set
The LVDS library provides an LVDS driver, receiver, and temperature stable voltage reference capable of supporting 16 drivers operating at data rates ...
674
2.0
LVDS IO Pad Set
The LVDS library provides an LVDS driver, receiver, and temperature stable voltage reference capable of supporting 16 drivers operating at data rates ...
675
2.0
LVDS IO Pad Set
The LVDS library provides an LVDS driver, receiver, and temperature stable voltage reference capable of supporting 16 drivers operating at data rates ...
676
2.0
LVDS IO Pad Set
The LVDS library provides an LVDS driver, receiver, and temperature stable voltage reference capable of supporting 16 drivers operating at data rates ...
677
1.0
I2C Master
The MI2CM macro implements a synchronous single-chip I2C Master only Macro capable of linking one CPU to one I2C-bus. Communication with I2C-bus is ca...
678
1.0
I2C MAster Slave
The MI2CMS macro implements a synchronous single-chip I2C Master and Slave Macro capable of linking one CPU to one I2C-bus. Communication with I2C-bus...
679
1.0
I2C Slave
The MI2CS macro implements a synchronous single-chip I2C Slave Macro capable of linking one CPU to one I2C-bus. Communication with I2C-bus is carried ...
680
1.0
SATA 2 HOST ON CYCLONE 5 GX
The LDS SATA 2 HOST_C5GX IP incorporates the Transport layer, the Link layer, the PHY layer and the Rate Match FIFO on a ALTERA Cyclone V GX FPGA. The...
681
1.0
SATA Device Controller on Altera Arria II GX
The LDS SATA DEVICE AR2GX IP incorporates the Transport layer, the Link layer, the PHY layer and the Rate Macth FIFO on a ALTERA ARRIA II GX FPGA. The...
682
1.0
SATA Device on Stratix IV GX
The LDS SATA DEVICE STR4GX IP incorporates the Transport layer, the Link layer, the PHY layer and the Rate Macth FIFO on a ALTERA STRATIX IV GX FPGA. ...
683
1.0
SATA Device on Virtex 6
The LDS SATA DEVICE XV6 IP incorporates the Command Layer, Transport layer, the Link layer and the PHY layer on a Xilinx Virtex 6 FPGA. The LDS SATA D...
684
1.0
SATA Host Controller
The LDS SATA HOST STR4GX IP incorporates the Transport layer, the Link layer, the PHY layer and the Rate Macth FIFO on a ALTERA Startix IV GX FPGA. Th...
685
1.0
SATA HOST Controller on Cyclone IV GX
The LDS SATA HOST C4GX IP incorporates the Transport layer, the Link layer, the PHY layer and the Rate Macth FIFO on a ALTERA Cyclone IV GX FPGA. The ...
686
1.0
SATA Host Controller on Spartan 6 LXT FPGA
The LDS SATA HOST SP6 IP incorporates the Transport layer, the Link layer and the PHY layer on a Xilinx Spartan 6 FPGA. The LDS SATA HOST SP6 IP is co...
687
1.0
SATA Host controller on Virtex 5 FXT
The LDS SATA HOST XF5 IP incorporates the Transport layer, the Link layer and the PHY layer on a Xilinx Virtex 5 FPGA. The LDS SATA HOST XV5 IP is com...
688
1.0
SATA Host Controller on Virtex 6 LXT
The LDS SATA HOST XV6 IP incorporates the Transport layer, the Link layer and the PHY layer on a Xilinx Virtex 6 FPGA. The LDS SATA HOST XV6 IP is com...
689
1.0
SATA Host on Altera Arria II GX
The LDS SATA HOST AR2GX IP incorporates the Transport layer, the Link layer, the PHY layer and the Rate Macth FIFO on a ALTERA ARRIA II GX FPGA. The L...
690
1.0
SATA HOST Synchronous IP
The LDS SATA HOST XV5 IP incorporates the Transport layer, the Link layer and the PHY layer on a Xilinx Virtex 5 FPGA. The LDS SATA HOST XV5 IP is com...
691
1.0
SATA III HOST Controller on Virtex 6
The LDS SATA 3 HOST XV6 IP incorporates the Transport layer, the Link layer and the PHY layer on a Xilinx Virtex 6 speed grade 2 FPGA. The LDS SATA 3 ...
692
1.0
SATA RECORDER ON VIRTEX 6
The LDS SATA RECORDER XV6 IP is a complete recorder system IP. It can be configured according the recording performance required and the quantity of ...
693
1.0
SATA RECORDER ON VIRTEX 7 GTX
...
694
1.0
Serial ATA Dual Host Controller
The LDS_SATA HOST DUAL XV5 IP incorporates the Transport layer, the Link layer and the PHY layer on a Xilinx Virtex 5 FPGA. The LDS SATA HOST DUAL XV5...
695
1.0
Serial protocol Interface Slave
The MSPIS IP implements a synchronous a single-chip SPI Slave IP capable of high speed serial data transfer with one SPI master. The MSPIS IP can be ...
696
1.0
Universal Asynchronous Receiver / Transmitter
The macro M16550, implements a synchronous universal asynchronous receiver/transmitter, which provides an interface between a microprocessor and a ser...
697
1.0
Universal Asynchronous Receiver Transmitter
The macro M16450, implements a synchronous universal asynchronous receiver/transmitter, which provides an interface between a microprocessor and a ser...
698
1.0
SPI Master - EEPROM Controller
The MSPIM IP implements a synchronous a single-chip SPI Master IP capable of high speed serial data transfer with up to 8 SPI slave. The MSPIM IP can...
699
1.0
Dual SATA Host controller on Virtex 5 FXT FPGA
The LDS SATA HOST DUAL XF5 IP incorporates the Transport layer, the Link layer and the PHY layer on a Xilinx Virtex 5 FPGA. The LDS SATA HOST DUAL XF5...
700
1.0
Synchronous Universal Asynchronous Receiver/Transmitter
The macro MUART, implements a synchronous universal asynchronous receiver/transmitter, which provides an interface between a microprocessor and a seri...