Analog & Mixed Signal IP Core

The ll_osc1455s01_ln14lpp_34201 is a 0.8V oscillator whose output frequency (FOUT) is controlled by internal registers. The typical output frequency o...

1902

1.0

4MHz Oscillator

The ll_osc2700a01_lnf28lp_7002 is a 1.0V oscillator whose output frequency (FOUT) is controlled by internal registers. The typical output frequency ra...

1903

1.0

2MHz Ultra Low Power Oscillator - Ultra low power (720nW) Silterra 0.18 μm

This macro-cell is a general purpose, ultra low power internal oscillator core designed for SilTerra 0.18µm CL180G CMOS technology. The circuit has in...

1904

1.0

6MHz ±1% PVT 1.8V Low Power Oscillator in Silterra 0.18um

This macro-cell is a low-power, precision, general purpose 1.8V 6MHz ±1% PVT internal oscillator core aimed for clock generation. A 7 bit digital bus ...

1905

1.0

6MHz ±1% PVT 3.3V Low Power Oscillator in Silterra 0.18um

This macro-cell is a low-power, precision, general purpose 3.3V 6MHz ±1% PVT internal oscillator core aimed for clock generation. A 7 bit digital bus ...

1906

1.0

SMIC 0.11um 1.2v APLL

This IP is a programmable Analog PLL suitable for high speed clock generation. High speed VCO can run from 50MHz to 500MHz. By setting DM(5:0) and DN(...

1907

1.0

SMIC 0.11um 32KHz Crystal Oscillator

Process: SMIC 0.11um Logic 1P8M 1.2V/3.3V CMOS process Operating voltage range: VCC_XO: 1.62~3.6V Operating temperature range: -40~125°C Operati...

1908

1.0

SMIC 0.13um 1.2v / 3.3v Audio PLL

This PLL is designed for audio clock generation. The reference clock is 13.5MHz crystal or the input clock. It supports both 256X and 384X oversamplin...

1909

1.0

SMIC 0.13um 1.2v 200MHz Ring Oscillator

The SMIC18_CODEC_01 specifies the design of a high-performance 16-bit stereo Audio CODEC for portable digital audio systems. The ADCs and DACs within ...

1910

1.0

SMIC 0.13um 1.2v APLL

This IP is a programmable Analog PLL suitable for high speed clock generation. High speed VCO can run from 50MHz to 500MHz. By setting DM(5:0) and DN(...

1911

1.0

SMIC 0.13um 1.2v APLL

This IP is a programmable Analog PLL suitable for high speed clock generation. The high speed VCO of this PLL can run up to 1000MHz. It contains a 1-6...

1912

1.0

SMIC 0.13um 1.2v APLL

This IP is a programmable Analog PLL suitable for high speed clock generation. High speed VCO can run from 50MHz to 500MHz. By setting DM(5:0) and DN(...

1913

1.0

SMIC 0.13um 1.2v APLL

This IP is a programmable Analog PLL suitable for high speed clock generation. High speed VCO can run from 50MHz to 500MHz. By setting DM(5:0) and DN(...

1914

1.0

SMIC 0.13um 1.2v APLL

This IP is a programmable Analog PLL suitable for generating system clock. It contains a PFD, Charge pump, 3rd order loop filter, a 1-64 input clock d...

1915

1.0

SMIC 0.13um 1.2v APLL

This IP is a programmable Analog PLL suitable for generating system clock. High speed VCO can run from 250MHz to 500MHz. By setting DM [5:0] and DN [7...

1916

1.0

SMIC 0.13um 1.2v APLL

This IP is a programmable Analog PLL suitable for high speed clock generation. The high speed VCO of this PLL can run up to 1000MHz. It contains a 1-6...

1917

1.0

SMIC 0.13um 1.2v FN-PLL

This IP is a programmable Analog PLL suitable for high speed clock generation. The high speed VCO can run from 200MHz to 500MHz. It contains a 1-64 in...

1918

1.0

SMIC 0.13um 1.2V Power On Reset

Present Power on Reset generates system reset pulses (POR12) when 1.2V power supplier (VIN12) is turned on. This IP can not operate stand-alone becaus...

1919

1.0

SMIC 0.13um 1.2V Power On Reset

Present Power on Reset generates system reset signal (POR12) when 1.2V power supplier (VIN12) is turned on. This IP can not operate stand-alone becaus...

1920

1.0

SMIC 0.13um 1.2v/3.3v APLL

This IP is a programmable Analog PLL suitable for high speed clock generation. High speed VCO can run from 100MHz to 300MHz (If the analog power drops...

1921

1.0

SMIC 0.13um 1.2v/3.3v PLL

This PLL is designed for audio clock generation. The reference clock is 12MHz crystal or the input clock. It supports 256*fs clock output, where fs is...

1922

1.0

SMIC 0.13um 1.2v/3.3v PLL

This PLL is designed for audio clock generation. The reference clock is 13.5MHz crystal or the input clock. It supports 256*fs clock output and 384*fs...

1923

1.0

SMIC 0.13um 1.2v/3.3v PLL

This PLL is designed for audio clock generation. The reference clock is either 12MHz crystal or the input clock. It supports 256*fs and 128*fs clock o...

1924

1.0

SMIC 0.13um 1.2v/3.3v PLL

This PLL is designed for audio clock generation. It can support 8.192MHz/10MHz/12MHz/12.288MHz/13MHz/13.5MHz/19.2MHz/21.25MHz/24MHz/26MHz/38.85MHz as ...

1925

1.0

SMIC 0.13um 1.2v/3.3v PLL Specification

This PLL is designed for audio clock generation. The reference clock is either 12MHz crystal or the input clock. It supports 256*fs clock output, wher...

1926

1.0

SMIC 0.13um 1.8V Power On Reset

Present Power on Reset generates system reset pulses (POR18) when 1.8V power supplier (VIN18) is turned on. This IP can not operate stand-alone becaus...

1927

1.0

SMIC 0.13um 1.8V Power On Reset

Present Power on Reset generates system reset signal (POR18) when 1.8V power supplier (VIN18) is turned on. This IP can not operate stand-alone becaus...

1928

1.0

SMIC 0.13um 10Bit 2Channel 24MHz

The VeriSilicon S13V33_ADC_06 IP includes an embedded 10bit 48MHz ADC IP(ADC_03). It is capable of sampling up to 2 channel analog input signals simu...

1929

1.0

SMIC 0.13um 12Bit 500Ksps R2R DAC

S13V33_R2RDAC_04 is a 12Bit 500Ksps DAC IP. It is suitable for voice application....

1930

1.0

SMIC 0.13um 1Channel 10Bit 10MHz DAC

S13V33_R2RDAC_01 is a 10bit@10MHz DAC IP which implements a 7-bit (from D [0] to D [6]) R2R_Ladder and 3-bit thermometer decoder architecture. At the ...

1931

1.0

SMIC 0.13um 2.4V Power on Reset

The present Power on Reset IP generates system reset signal (POR18, low level reset) when 3.3v power supplier (VIN18) is turned on. This IP cannot ope...

1932

1.0

SMIC 0.13um 24-Bit Stereo Sigma-Delta ADC

The S13V33_ADC_01B specifies the design of high-performance 24-bit stereo Audio ADC for portable digital audio systems. The ADC within the specificati...

1933

1.0

SMIC 0.13um 24Bit Sigma-Delta

The S13V33_DAC_01D specifies the design of a high-performance 24-bit stereo Audio DAC for portable digital audio systems. The DAC of this design uses ...

1934

1.0

SMIC 0.13um 24M Crystal Oscillator

This is a crystal oscillator specifically designed for low power application. It is configurable to suit for 2M~32MHz crystals working at fundamental ...

1935

1.0

SMIC 0.13um 3.3V 10Bit Single

The VeriSilicon S13V33_ADC_03 IP is a 10 bit, low power, and pipeline analog to digital converter capable of running at up to 50MHz conversion rate. ...

1936

1.0

SMIC 0.13um 3.3V Power On Reset

Present Power on Reset generates system reset pulses (POR33) when the 3.3V power supplier (VIN33) is turned on. This IP can not operate stand-alone be...

1937

1.0

SMIC 0.13um 3.3V Power On Reset

Present Power on Reset generates system reset signal (POR33) when 3.3V power supplier (VIN33) is turned on. This IP can not operate stand-alone becaus...

1938

1.0

SMIC 0.13um 3.3v RC Oscillator

The present IP is a RC oscillator with internal R and C to generate 32±20%KHz clock. Its power supply is 3.3V....

1939

1.0

SMIC 0.13um 3.3V Trimming Block

This IP is suitable for voltage trimming. It provides 8 trimming bits and assures high reliability for trimming success. This particular physical IP ...

1940

1.0

SMIC 0.13um 3.3v-1.2v Power Regulator

Targeted in SMIC 0.13um 3.3v Logic process, current design of Power Regulator is to provide 1.2v power supply which is regulated from the single 3.3v ...

1941

1.0

SMIC 0.13um 3.3V-1.8V 360mA Synchronous Buck DC-DC

The IP is a high efficiency, low ripple, current mode buck switching regulator. The internal synchronous switches increase the efficiency and eliminat...

1942

1.0

SMIC 0.13um 3.3V/1.2V Power on Reset

The present Power-On-Reset circuit generates system reset pulses (RST) when both the 3.3V and 1.2V power suppliers are turned on. Output signal RST12 ...

1943

1.0

SMIC 0.13um 3.3v/1.2v Power Regulator

Present IP devises a NO-CAP regulator which generates 1.2V voltage from 3.3V power supply and provides100mA plus loading current. Targeted in the SMI...

1944

1.0

SMIC 0.13um 32KHz Crystal Oscillator

This is a 32768Hz crystal oscillator specifically designed for ultra-low power application. The sole power supply is 3.3V, but it can be as low as 1.6...

1945

1.0

SMIC 0.13um 32KHz Crystal Oscillator

This is a 32768Hz crystal oscillator specifically designed for ultra-low power application. The sole power supply is 3.3V, but it can be as low as 1.6...

1946

1.0

SMIC 0.13um 5v-3.3v/1.2v Battery Charger

Based on SMIC 0.13µm 3.3v/1.2v Logic process, current design of the Battery Charger IP is a complete constant current/constant voltage linear charger ...

1947

1.0

SMIC 0.13um DLL

The S13V33_DLL_04 generates 4-channel fixed timing delay. The operating voltage ranges from 1.08V ~ 1.32V, and the operating junction temperature from...

1948

1.0

SMIC 0.13um Low Leakage 1.5V 10Bit Dual 10~80MHz Single 20~160MHz ADC

The VeriSilicon S13LLV33_ADC_10 IP is a 1.5V 10Bit pipeline analog to digital converter capable of running at up to 160MHz conversion rate in one chan...

1949

1.0

SMIC 0.13um Low Leakage APLL

This IP is a programmable Analog PLL suitable for high speed clock generation. The high speed VCO of this PLL can run up to 1000MHz. It contains a 64 ...

1950

1.0

SMIC 0.13um LVDS Receiver

The LVDS Receiver IP is designed to support Single Link transmission between Host and Flat Panel Display with up to SXGA+ resolution and Dual Link tra...

40|

41|

...|