10-Bit 3-Channel Video DAC PHY_28nm
Innosilicon Video DAC IP consists of the digital logic and the physical layer. The digital logic receives the video and clock signals from controller. It outputs these data to physical layer for further process.
The physical layer contains one or multiple current-steering DACs and bias circuit. Each DAC receives 10-bit parallel input data and converts the digital data to analog current output. The output current is programmable and maximum output current is 34.7mA, which results in a 1.3V voltage swing on typical 37.5Ω resistance load (double 75Ω termination). The update rate is up to 300MHz. The bias circuit generates voltage and current reference.
Innosilicon Video DAC IP offers reliable implementation for analog video interface, which can be integrated in the SOC used in multimedia device.
View 10-Bit 3-Channel Video DAC PHY_28nm full description to...
- see the entire 10-Bit 3-Channel Video DAC PHY_28nm datasheet
- get in contact with 10-Bit 3-Channel Video DAC PHY_28nm Supplier
Audio CODEC IP
- LC3plus Audio Codec IP for Bluetooth LE Audio
- Audio codec with capacitor-less 106 dB dynamic range ADC and 120 dB SNR DAC with low latency
- H.264 Audio & Video Decoder IP
- 24bit 96KHz Audio Codec low power ADC IP core
- 16-22Bit 97dB Stereo Audio CODEC with Linein/Digital and Analog Microphone Recording, Lineout/Headphone/Speaker Playback, SMIC 65nmll
- 16-24Bit 100dB Voice/Audio CODEC in SMIC 40nm LL