32-bit RISC-V embedded processor with TUV SUD ISO 26262 ASIL B certification
M31 MIPI M-PHY is certified with ASIL-B safety level of ISO 26262 to provide safe and reliable automotive SoC design
Taiwan Hsinchu – September 27, 2018 -- M31 Technology Corporation (Taiwan stock code: 6643), a global Silicon Intellectual Property (IP) boutique, announced today that its MIPI M-PHY Gear3 IP has been certified with the ASIL B safety level of ISO 26262 and will be used by international first-class automotive electronics manufacturers to provide safe and reliable automotive SoC design.
The MIPI M-PHY, which is promoted by the global MIPI Alliance,, features high -bandwidth and, low -power features consumption, and supports a variety of hardware interfaces and protocols for display, camera, storage, and power management. MIPI M-PHY IP was originally used in all kinds of Mobile Devices, Wearable Devices, Action Cameras, Unmanned Aerial Vehicles, VR headsets, and nowadays the application extends to the field of automotive electronics.
Scott Chang, Vice President of M31 Technology, stated that “The MIPI M-PHY developed by M31 Technology has a transmission rate of 5.83 billion Gigabyte per second per lane (5.83 Gbps/Lane), which has passed different process validations of the tier-one semiconductor manufacturers. The M-PHY Gear 3 IP certified by ISO 26262 is in compliance with the ASIL-B safety level of European Automotive Regulations. The M31 M-PHY IP can be optimized for the chip design on Advanced Driver Assistance Systems (ADAS), Autonomous Driving Systems (ADS), In-vehicle Infotainment Systems (IVI) and Intelligent Transportation Systems (ITS). It provides a safer and more unique design advantage for the automotive SoC design to meet the safety regulations of the automotive manufacturers.”
The M-PHY Gear 3 IP certified by ISO 26262 not only follows the development process of ISO 26262, but also performs quantitative analysis specifically for failure modes to improve product stability and safety. In addition to achieving the ASIL-B safety level for the automotive electronics, the M31 M-PHY Gear 3 IP still maintains a high level of industry and also meets the high standards of industry leaders for surface area and power consumption without additional cost, making it the an ideal high-performance and cost-effective best choice for automotive electronics manufacturers.
With the diversified development of automotive electronic devices, the use of cameras and displays continues to grow, and the importance of MIPI M-PHY is increasing. The applicable fields include the SoC on for Advanced Driver Assistance Systems (ADAS), Autonomous Driving Systems (ADS), In-vehicle Infotainment Systems (IVI) and Intelligent Transportation Systems (ITS).
In addition to MIPI M-PHY, this year M31 Technology will continue to implement other ISO 26262 product certification programs to provide the industry with more secure and reliable automotive IP. In the future, M31 will continue to develop high-quality “boutique IPs” based on the spirit of ultimate technology for the global IC industry.
Scott Chang, Vice President of M31 Technology (middle) was awarded ISO 26262 ASIL-B certificate by German SGS-TÜV institution
About M31 Technology
M31 Technology Corporation is a leading silicon intellectual property (IP) provider. The company was founded in October, 2011 with its headquarters in Hsinchu, Taiwan. M31’s strength is in its R&D and customer services. With substantial successful experiences in IP development, IC design and electronic design automation fields, M31 focuses on high-speed interface IP, memory compilers, standard cell library and ESD/IO library solutions. For more information please visit www.m31tech.com
|
M31 Technology Corp. Hot IP
- USB 3.2 Gen2/Gen1 PHY IP in TSMC(5nm,6nm, 7nm,12nm/16nm, 22nm, 28nm, 40nm, 55nm)
- PCIe 4.0 PHY in TSMC(6nm,7nm, 12nm,16nm)
- MIPI M-PHY v3.1 IP in TSMC(12/16nm, 28nm, 40nm, and 55nm)
- MIPI D-PHY RX/TX v1.1 / v1.2 IP in TSMC (12/16nm, 28nm, 40nm, and 55nm process)
- SerDes PHY IP in TSMC (7nm, 12/16nm, 22nm, 28nm)
Related News
- Arasan achieves ISO 26262 ASIL B automotive safety certification for its Total eMMC IP Solution
- M31 Memory Compiler and GPIO are certified with ASIL-D safety level of ISO 26262
- Synopsys Test Platform Tools Certified for the Most Stringent Level of Automotive Safety Measures Defined by the ISO 26262 Standard
- Synopsys Verification Solution Certified for the Most Stringent Level of Automotive Safety Measures Defined by the ISO 26262 Standard
- VeriSilicon's 2nd generation automotive ISP series IP passed ISO 26262 ASIL B and ASIL D certifications
Breaking News
- Alphawave Semi announced today a refocussing of the Board of Directors after reaching the three-year milestone since the Company's IPO
- Synopsys and Samsung Electronics Collaborate to Achieve First Production Tapeout of Flagship Mobile CPU with Leading Performance on Samsung Foundry's GAA Process
- Worldwide Silicon Wafer Shipments Dip 5% in Q1 2024, SEMI Reports
- GOWIN's progress in global automotive market gathers momentum with award of ISO 26262 certification for its FPGA design environment
- PCI-SIG® Announces CopprLink™ Cable Specifications for PCIe® 5.0 and 6.0 Technology
Most Popular
- Silvaco Announces Launch of Initial Public Offering
- TSMC's A16 Process Moves Goalposts in Tech-Leadership Game
- Radiation-Tolerant PolarFire® SoC FPGAs Offer Low Power, Zero Configuration Upsets, RISC-V Architecture for Space Applications
- Synopsys Accelerates Next-Level Chip Innovation on TSMC Advanced Processes
- QuickLogic Releases Aurora 2.6 with Expanded Operating System Support and Up to 15% Faster Performance
E-mail This Article | Printer-Friendly Page |